add all files

2019-07-04 03:49:08 +01:00
parent 55eb559940
commit 7789af7e3b
99 changed files with 2463 additions and 0 deletions
@@ -0,0 +1,20 @@
+#!/bin/bash
+
+dev=`grep -rn "Option" /usr/share/X11/xorg.conf.d/99-fbturbo.conf | grep "fbdev" |awk -F\" '{printf $4}'`
+if test "$dev" = "/dev/fb0";then
+echo "The system is already output for HDMI and does not need to be set up any more"
+exit
+fi
+sudo ./system_backup.sh
+
+#sudo cp -rf ./usr/modules-HDMI  /etc/modules
+#sudo cp -rf ./usr/99-fbturbo.conf-HDMI  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+#sudo cp ./boot/config-nomal.txt /boot/config.txt
+#if [ -b /dev/mmcblk0p7 ]; then
+#sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+#else
+#sudo cp ./usr/cmdline.txt /boot/
+#fi
+#sudo cp ./usr/inittab /etc/
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,71 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft9341:rotate=90" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+sudo cp -rf ./usr/99-calibration.conf-32-90  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-32.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:32:90:320:240" > ./.have_installed
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,71 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft9341:rotate=270" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+sudo cp -rf ./usr/99-calibration.conf-32-270  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-32.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:32:270:320:240" > ./.have_installed
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,71 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft9341:rotate=270" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+sudo cp -rf ./usr/99-calibration.conf-32-270  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-32.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:32:270:320:240" > ./.have_installed
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,71 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/
+sudo cp ./usr/tft9341-overlay.dtb /boot/overlays/tft9341.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft9341:rotate=270" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+sudo cp -rf ./usr/99-calibration.conf-32-270  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-32.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:32:270:320:240" > ./.have_installed
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,72 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/
+sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/tft35a.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=tft35a:rotate=90" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+sudo cp -rf ./usr/99-calibration.conf-35-90  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-35.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:35:90:480:320" > ./.have_installed
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,74 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=0" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 800 480 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+#sudo cp -rf ./boot/config-5.txt /boot/config.txt 
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d 
+fi
+sudo cp -rf ./usr/99-calibration.conf-5-0 /etc/X11/xorg.conf.d/99-calibration.conf 
+sudo touch ./.have_installed
+echo "hdmi:resistance:5:0:800:480" > ./.have_installed
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,49 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=0" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 800 480 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+#sudo cp -rf ./boot/config-7B-800x480.txt /boot/config.txt
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/40-libinput.conf-0 /etc/X11/xorg.conf.d/40-libinput.conf
+sudo touch ./.have_installed
+echo "hdmi:capacity:7B-800x480:0:800:480" > ./.have_installed
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,49 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=0" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+#sudo cp -rf ./boot/config-7C-1024x600.txt /boot/config.txt
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/40-libinput.conf-0 /etc/X11/xorg.conf.d/40-libinput.conf
+sudo touch ./.have_installed
+echo "hdmi:capacity:7C-1024x600:0:1024:600" > ./.have_installed
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,45 @@
+#!/bin/bash
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+sudo mkdir -p /etc/X11/xorg.conf.d
+sudo cp ./usr/mhs24-overlay.dtb /boot/overlays/
+sudo cp ./usr/mhs24-overlay.dtb /boot/overlays/mhs24.dtbo
+sudo cp -rf ./usr/99-calibration.conf-mhs24  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo-fbcp.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if [ -b /dev/mmcblk0p7 ]; then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp ./boot/config-mhs24.txt /boot/config.txt
+#FBCP install
+sudo cp -rf ./etc/rc.local /etc/rc.local
+sudo apt-get install git cmake -y
+sudo rm -rf rpi-fbcp
+sudo git clone https://github.com/tasanakorn/rpi-fbcp
+sudo mkdir ./rpi-fbcp/build
+cd ./rpi-fbcp/build/
+sudo cmake ..
+sudo make
+sudo install fbcp /usr/local/bin/fbcp
+#evdev install
+nodeplatform=`uname -n`
+kernel=`uname -r`
+version=`uname -v`
+if test "$nodeplatform" = "raspberrypi";then
+echo "this is raspberrypi kernel"
+version=${version%% *}
+version=${version#*#}
+echo $version
+if test $version -lt 970;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo apt-get install xserver-xorg-input-evdev
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+echo "reboot"
+fi
+else
+echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+fi
+sudo reboot
@@ -0,0 +1,95 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/mhs32-overlay.dtb /boot/overlays/
+sudo cp ./usr/mhs32-overlay.dtb /boot/overlays/mhs32.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=mhs32:rotate=270" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 480 320 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+sudo cp -rf ./usr/99-calibration.conf-mhs32-270  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-mhs32.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:mhs32:270:480:320" > ./.have_installed
+#FBCP install
+wget --spider -q -o /dev/null --tries=1 -T 10 https://github.com
+if [ $? -eq 0 ]; then
+sudo cp -rf ./usr/99-fbturbo-fbcp.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+sudo cp -rf ./etc/rc.local /etc/rc.local
+sudo apt-get install git cmake -y 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "^E:" ./error_output.txt && exit
+sudo rm -rf rpi-fbcp
+sudo git clone https://github.com/tasanakorn/rpi-fbcp
+sudo mkdir ./rpi-fbcp/build
+cd ./rpi-fbcp/build/
+sudo cmake ..
+sudo make
+sudo install fbcp /usr/local/bin/fbcp
+cd - > /dev/null
+fi
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,97 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/mhs35-overlay.dtb /boot/overlays/
+sudo cp ./usr/mhs35-overlay.dtb /boot/overlays/mhs35.dtbo
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=mhs35:rotate=90" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 480 320 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+sudo cp -rf ./usr/99-calibration.conf-mhs35-90  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-mhs35.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:mhs35:90:480:320" > ./.have_installed
+
+#FBCP install
+wget --spider -q -o /dev/null --tries=1 -T 10 https://github.com
+if [ $? -eq 0 ]; then
+sudo cp -rf ./usr/99-fbturbo-fbcp.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+sudo cp -rf ./etc/rc.local /etc/rc.local
+sudo apt-get install git cmake -y 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "^E:" ./error_output.txt && exit
+sudo rm -rf rpi-fbcp
+sudo git clone https://github.com/tasanakorn/rpi-fbcp
+sudo mkdir ./rpi-fbcp/build
+cd ./rpi-fbcp/build/
+sudo cmake ..
+sudo make
+sudo install fbcp /usr/local/bin/fbcp
+cd - > /dev/null
+fi
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,95 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/mhs395-overlay.dtb /boot/overlays/
+sudo cp ./usr/mhs395-overlay.dtb /boot/overlays/mhs395.dtbo
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=mhs395:rotate=90" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 480 320 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+sudo cp -rf ./usr/99-calibration.conf-mhs395-90  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+#sudo cp ./boot/config-mhs395.txt /boot/config.txt
+sudo touch ./.have_installed
+echo "gpio:resistance:mhs395:90:480:320" > ./.have_installed
+
+#FBCP install
+wget --spider -q -o /dev/null --tries=1 -T 10 https://github.com
+if [ $? -eq 0 ]; then
+sudo cp -rf ./usr/99-fbturbo-fbcp.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+sudo cp -rf ./etc/rc.local /etc/rc.local
+sudo apt-get install git cmake -y 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "^E:" ./error_output.txt && exit
+sudo rm -rf rpi-fbcp
+sudo git clone https://github.com/tasanakorn/rpi-fbcp
+sudo mkdir ./rpi-fbcp/build
+cd ./rpi-fbcp/build/
+sudo cmake ..
+sudo make
+sudo install fbcp /usr/local/bin/fbcp
+cd - > /dev/null
+fi
+#evdev install
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev  2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,45 @@
+#!/bin/bash
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+sudo mkdir -p /etc/X11/xorg.conf.d
+sudo cp ./usr/mis35-overlay.dtb /boot/overlays/
+sudo cp ./usr/mis35-overlay.dtb /boot/overlays/mis35.dtbo
+sudo cp -rf ./usr/99-calibration.conf-mhs35  /etc/X11/xorg.conf.d/99-calibration.conf
+sudo cp -rf ./usr/99-fbturbo-fbcp.conf  /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+if [ -b /dev/mmcblk0p7 ]; then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp ./boot/config-mis35.txt /boot/config.txt
+#FBCP install
+sudo cp -rf ./etc/rc.local /etc/rc.local
+sudo apt-get install git cmake -y
+sudo rm -rf rpi-fbcp
+sudo git clone https://github.com/tasanakorn/rpi-fbcp
+sudo mkdir ./rpi-fbcp/build
+cd ./rpi-fbcp/build/
+sudo cmake ..
+sudo make
+sudo install fbcp /usr/local/bin/fbcp
+#evdev install
+nodeplatform=`uname -n`
+kernel=`uname -r`
+version=`uname -v`
+if test "$nodeplatform" = "raspberrypi";then
+echo "this is raspberrypi kernel"
+version=${version%% *}
+version=${version#*#}
+echo $version
+if test $version -lt 970;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo apt-get install xserver-xorg-input-evdev
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+echo "reboot"
+fi
+else
+echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+fi
+sudo reboot
@@ -0,0 +1,74 @@
+#!/bin/bash
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "hdmi_force_edid_audio=1" >> ./boot/config.txt.bak
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=0" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 480 320 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+#sudo cp -rf ./boot/config-35-480X320.txt /boot/config.txt 
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d 
+fi
+sudo cp -rf ./usr/99-calibration.conf-3508-0 /etc/X11/xorg.conf.d/99-calibration.conf
+sudo touch ./.have_installed
+echo "hdmi:resistance:3508:0:480:320" > ./.have_installed
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,32 @@
+#!/bin/bash
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+sudo cp -rf ./boot/config-35-480X320.txt /boot/config.txt 
+if [ -b /dev/mmcblk0p7 ]; then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
+sudo mkdir -p /etc/X11/xorg.conf.d 
+sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf
+nodeplatform=`uname -n`
+kernel=`uname -r`
+version=`uname -v`
+if test "$nodeplatform" = "raspberrypi";then
+echo "this is raspberrypi kernel"
+version=${version%% *}
+version=${version#*#}
+echo $version
+if test $version -lt 970;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo apt-get install xserver-xorg-input-evdev
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+echo "reboot"
+fi
+else
+echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+fi
+sudo reboot
@@ -0,0 +1,31 @@
+#!/bin/bash
+sudo cp -rf ./boot/config-35DPI.txt /boot/config.txt
+#sudo cp ./usr/bcm2709-rpi-2-b.dtb /boot/
+#sudo cp ./usr/bcm2710-rpi-3-b.dtb /boot/ 
+#sudo cp ./usr/cmdline.txt /boot/
+#sudo cp ./usr/qddpi24.dtb /boot/overlays/
+#sudo cp ./usr/qddpi24.dtb /boot/overlays/qddpi24.dtbo
+#sudo cp ./usr/inittab /etc/
+#sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
+sudo mkdir -p /etc/X11/xorg.conf.d 
+sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf 
+nodeplatform=`uname -n`
+kernel=`uname -r`
+version=`uname -v`
+if test "$nodeplatform" = "raspberrypi";then
+echo "this is raspberrypi kernel"
+version=${version%% *}
+version=${version#*#}
+echo $version
+if test $version -lt 970;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo apt-get install xserver-xorg-input-evdev
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+echo "reboot"
+fi
+else
+echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+fi
+sudo reboot
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "hdmi_force_edid_audio=1" >> ./boot/config.txt.bak
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=3" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 480 800 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo echo "dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+
+#sudo cp -rf ./boot/config-397.txt /boot/config.txt 
+
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf 
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d 
+fi
+sudo cp -rf ./usr/99-calibration.conf-397-270 /etc/X11/xorg.conf.d/99-calibration.conf 
+sudo touch ./.have_installed
+echo "hdmi:resistance:397:270:480:800" > ./.have_installed
+
+#nodeplatform=`uname -n`
+#kernel=`uname -r`
+version=`uname -v`
+#if test "$nodeplatform" = "raspberrypi";then
+#echo "this is raspberrypi kernel"
+version=${version##* }
+#version=${version#*#}
+echo $version
+if test $version -lt 2017;then
+echo "reboot"
+else
+echo "need to update touch configuration"
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb 2> error_output.txt
+#sudo apt-get install xserver-xorg-input-evdev 2> error_output.txt
+result=`cat ./error_output.txt`
+echo -e "\033[31m$result\033[0m"
+grep -q "error:" ./error_output.txt && exit
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
+#echo "reboot"
+fi
+#else
+#echo "this is not raspberrypi kernel, no need to update touch configure, reboot"
+#fi
+
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,50 @@
+#!/bin/bash
+
+sudo ./system_backup.sh
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt ./boot/config.txt.bak
+else
+sudo cp -rf ./boot/config-nomal.txt ./boot/config.txt.bak
+sudo echo "hdmi_force_hotplug=1" >> ./boot/config.txt.bak
+fi
+sudo echo "hdmi_force_edid_audio=1" >> ./boot/config.txt.bak
+sudo echo "dtparam=i2c_arm=on" >> ./boot/config.txt.bak
+sudo echo "dtparam=spi=on" >> ./boot/config.txt.bak
+sudo echo "enable_uart=1" >> ./boot/config.txt.bak
+sudo echo "display_rotate=0" >> ./boot/config.txt.bak
+sudo echo "max_usb_current=1" >> ./boot/config.txt.bak
+sudo echo "config_hdmi_boost=7" >> ./boot/config.txt.bak
+sudo echo "hdmi_group=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=1" >> ./boot/config.txt.bak
+sudo echo "hdmi_mode=87" >> ./boot/config.txt.bak
+sudo echo "hdmi_drive=2" >> ./boot/config.txt.bak
+sudo echo "hdmi_cvt 800 480 60 6 0 0 0" >> ./boot/config.txt.bak
+sudo cp -rf ./boot/config.txt.bak /boot/config.txt
+#sudo cp -rf ./boot/config-MPI5001.txt /boot/config.txt
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp ./usr/cmdline.txt-noobs /boot/cmdline.txt
+else
+sudo cp ./usr/cmdline.txt /boot/
+fi
+sudo cp ./usr/inittab /etc/
+sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+
+if [ ! -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir /etc/X11/xorg.conf.d
+fi
+sudo cp ./usr/40-libinput.conf-0 /etc/X11/xorg.conf.d/40-libinput.conf
+sudo touch ./.have_installed
+echo "hdmi:capacity:MPI5001:0:800:480" > ./.have_installed
+sudo sync
+sudo sync
+sleep 1
+if [ $# -eq 1 ]; then
+sudo ./rotate.sh $1
+elif [ $# -gt 1 ]; then
+echo "Too many parameters"
+fi
+
+echo "reboot now"
+sudo reboot
@@ -0,0 +1,80 @@
+LCD driver for the Raspberry PI Installation<br>
+====================================================
+Update: <br>
+v1.9-20181204<br>
+Update to support MHS40 & MHS32<br>
+Update: <br>
+v1.8-20180907<br>
+Update to support MHS35<br>
+Update: <br>
+v1.7-20180320<br>
+Update to support Raspbian Version:March 2018(Release date:2018-03-13)<br>
+Update: <br>
+  v1.6-20170824<br>
+  Update xserver to support Raspbian-2017-08-16<br>
+Update: <br>
+  v1.5-20170706<br>
+  Update to support Raspbian-2017-07-05,Raspbian-2017-06-21<br>
+Update: <br>
+  v1.3-20170612<br>
+  fixed to support Raspbian-2017-03-02,Raspbian-2017-04-10<br>
+Update: <br>
+  v1.2-20170302<br>
+  Add xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb to support Raspbian-2017-03-02<br>
+Update: <br>
+  v1.1-20160815<br><br>
+  
+1.)Step1, Install Raspbian official mirror <br>
+====================================================
+  a)Download Raspbian official mirror:<br>
+  https://www.raspberrypi.org/downloads/<br>
+  b)Use“SDFormatter.exe”to Format your TF Card<br>
+  c)Use“Win32DiskImager.exe” Burning mirror to TF Card<br>
+     
+2.) Step2, Clone my repo onto your pi<br>
+====================================================
+Use SSH to connect the raspberry pi, <br>
+And Ensure that the raspberry pi is connected to the Internet before executing the following commands:
+-----------------------------------------------------------------------------------------------------
+
+```sudo rm -rf LCD-show```<br>
+```git clone https://github.com/goodtft/LCD-show.git```<br>
+```chmod -R 755 LCD-show```<br>
+```cd LCD-show/```<br>
+  
+3.)Step3, According to your LCD's type, excute:
+====================================================
+In case of 2.4" RPi Display(MPI2401)<br>
+  ```sudo ./LCD24-show```<br><br>
+In case of 2.8" RPi Display(MPI2801)<br>
+  ```sudo ./LCD28-show```<br><br>
+In case of 3.2" RPi Display(MPI3201)<br>
+  ```sudo ./LCD32-show```<br><br>
+In case of 3.5inch RPi Display(MPI3501)<br>
+  ```sudo ./LCD35-show```<br><br>
+In case of 3.5" HDMI Display-B(MPI3508)<br>
+  ```sudo ./MPI3508-show```<br><br>
+ In case of 3.2" High Speed display(MHS32)<br>
+  ```sudo ./MHS32-show```<br><br>
+In case of 3.5" High Speed display(MHS35)<br>
+  ```sudo ./MHS35-show```<br><br>
+In case of 4.0" High Speed display(MHS40)<br>
+  ```sudo ./MHS40-show```<br><br>
+In case of 4.0" HDMI Display(MPI4008)<br>
+  ```sudo ./MPI4008-show```<br><br>
+In case of 5inch HDMI Display-B(Capacitor touch)(MPI5001):<br>
+  ```sudo ./MPI5001-show```<br><br>  
+In case of 5inch HDMI Display(Resistance touch)(MPI5008)<br>
+  ```sudo ./LCD5-show```<br><br>
+In case of 7inch HDMI Display-B-800X480(MPI7001)<br>
+  ```sudo ./LCD7B-show```<br><br>
+In case of 7inch HDMI Display-C-1024X600(MPI7002)<br>
+  ```sudo ./LCD7C-show```<br><br><br>
+If you need to switch back to the traditional HDMI display<br>
+  ```sudo ./LCD-hdmi```<br>
+
+Wait a few minutes,the system will restart automaticall , enjoy with your LCD.
+-------------------------------------------------------------------------------
+The LCD-show.tar.gz also can be download from:
+http://www.lcdwiki.com/RaspberryPi-LCD-Driver
+<br><br>
@@ -0,0 +1,64 @@
+# For more options and information see
+# http://rpf.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Uncomment this to enable the lirc-rpi module
+#dtoverlay=lirc-rpi
+
+# Additional overlays and parameters are documented /boot/overlays/README
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+
+[all]
+#dtoverlay=vc4-fkms-v3d
@@ -0,0 +1,67 @@
+# For more options and information see
+# http://rpf.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Uncomment this to enable the lirc-rpi module
+#dtoverlay=lirc-rpi
+
+# Additional overlays and parameters are documented /boot/overlays/README
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+
+[all]
+#dtoverlay=vc4-fkms-v3d
+
+# NOOBS Auto-generated Settings:
+hdmi_force_hotplug=1
@@ -0,0 +1,23 @@
+#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+# Print the IP address
+_IP=$(hostname -I) || true
+if [ "$_IP" ]; then
+  printf "My IP address is %s\n" "$_IP"
+fi
+
+sleep 7
+fbcp &
+
+exit 0
@@ -0,0 +1,20 @@
+#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+# Print the IP address
+_IP=$(hostname -I) || true
+if [ "$_IP" ]; then
+  printf "My IP address is %s\n" "$_IP"
+fi
+
+exit 0
@@ -0,0 +1,171 @@
+#!/bin/bash
+cur_dir=`pwd`
+if [ ! -f $cur_dir/.have_installed ]; then
+echo "Please install the LCD driver first"
+echo "Usage: sudo ./xxx-show. xxx: MHS35,LCD35,MPI3508 etc."
+exit
+fi
+
+print_info()
+{
+echo "Usage:sudo ./rotate.sh [0] [90] [180] [270] [360] [450]"
+echo "0-Screen rotation 0 degrees"
+echo "90-Screen rotation 90 degrees"
+echo "180-Screen rotation 180 degrees"
+echo "270-Screen rotation 270 degrees"
+echo "360-Screen flip horizontal(Valid only for HDMI screens)"
+echo "450-Screen flip vertical(Valid only for HDMI screens)"
+}
+
+if [ $# -eq 0 ]; then
+echo "Please input parameter:0,90,180,270,360,450"
+print_info
+exit
+elif [ $# -eq 1 ]; then
+if [ ! -n "$(echo $1| sed -n "/^[0-9]\+$/p")" ]; then
+echo "Invalid parameter"
+print_info
+exit
+else
+if [ $1 -ne 0 ] && [ $1 -ne 90 ] && [ $1 -ne 180 ] && [ $1 -ne 270 ] && [ $1 -ne 360 ] && [ $1 -ne 450 ]; then
+echo "Invalid parameter"
+print_info
+exit
+fi
+fi
+else
+echo "Too many parameters, only one parameter allowed"
+exit
+fi
+
+#get screen parameter
+tmp=`cat $cur_dir/.have_installed`
+output_type=`cat $cur_dir/.have_installed | awk -F ':' '{printf $1}'`
+touch_type=`cat $cur_dir/.have_installed | awk -F ':' '{printf $2}'`
+device_id=`cat $cur_dir/.have_installed | awk -F ':' '{printf $3}'`
+default_value=`cat $cur_dir/.have_installed | awk -F ':' '{printf $4}'`
+width=`cat $cur_dir/.have_installed | awk -F ':' '{printf $5}'`
+height=`cat $cur_dir/.have_installed | awk -F ':' '{printf $6}'`
+
+if [ $output_type = "hdmi" ]; then
+result=`grep -rn "^display_rotate=" /boot/config.txt | tail -n 1`
+line=`echo -n $result | awk -F: '{printf $1}'`
+str=`echo -n $result | awk -F: '{printf $NF}'`
+old_rotate_value=`echo -n $result | awk -F= '{printf $NF}'`
+if [ $old_rotate_value = "0x10000" ]; then
+old_rotate_value=4
+elif  [ $old_rotate_value = "0x20000" ]; then
+old_rotate_value=5
+fi
+if [ $1 -eq 0 ] || [ $1 -eq 90 ] || [ $1 -eq 180 ] || [ $1 -eq 270 ]; then
+new_rotate_value=$[(($default_value+$1)%360)/90]
+else
+new_rotate_value=$[$1/90]
+fi
+elif [ $output_type = "gpio" ]; then
+result=`grep -rn "^dtoverlay=" /boot/config.txt | grep ":rotate=" | tail -n 1`
+line=`echo -n $result | awk -F: '{printf $1}'`
+str=`echo -n $result | awk -F: '{printf $NF}'`
+old_rotate_value=`echo -n $result | awk -F= '{printf $NF}'`
+if [ $1 -eq 0 ] || [ $1 -eq 90 ] || [ $1 -eq 180 ] || [ $1 -eq 270 ]; then
+new_rotate_value=$[($default_value+$1)%360]
+else
+echo "Invalid parameter: only for HDMI screens"
+exit
+fi
+else
+echo "Invalid output type"
+exit
+fi
+
+if [ $old_rotate_value -eq $new_rotate_value ]; then
+if [ $output_type = "hdmi" ]; then
+if [ $1 -eq 0 ] || [ $1 -eq 90 ] || [ $1 -eq 180 ] || [ $1 -eq 270 ]; then
+old_rotate_value=$[($old_rotate_value*90+360-$default_value)%360]
+else
+old_rotate_value=$[$old_rotate_value*90]
+fi
+elif [ $output_type = "gpio" ]; then
+old_rotate_value=$[($old_rotate_value+360-$default_value)%360]
+fi
+echo "Current rotate value is $old_rotate_value"
+exit
+fi
+
+#setting LCD rotate
+if [ $output_type = "hdmi" ]; then
+if [ $new_rotate_value -eq 4 ]; then
+sudo sed -i -e ''"$line"'s/'"$str"'/display_rotate=0x10000/' /boot/config.txt
+elif  [ $new_rotate_value -eq 5 ]; then
+sudo sed -i -e ''"$line"'s/'"$str"'/display_rotate=0x20000/' /boot/config.txt
+else
+sudo sed -i -e ''"$line"'s/'"$str"'/display_rotate='"$new_rotate_value"'/' /boot/config.txt
+fi
+new_rotate_value=$[$new_rotate_value*90]
+elif [ $output_type = "gpio" ]; then
+sudo sed -i -e ''"$line"'s/'"$str"'/rotate='"$new_rotate_value"'/' /boot/config.txt
+resultr=`grep -rn "^hdmi_cvt" /boot/config.txt | tail -n 1 | awk -F' ' '{print $1,$2,$3}'`
+if [ -n "$resultr" ]; then
+liner=`echo -n $resultr | awk -F: '{printf $1}'`
+strr=`echo -n $resultr | awk -F: '{printf $2}'`
+if [ $new_rotate_value -eq $default_value ] || [ $new_rotate_value -eq $[($default_value+180+360)%360] ]; then
+sudo sed -i -e ''"$liner"'s/'"$strr"'/hdmi_cvt '"$width"' '"$height"'/' /boot/config.txt
+elif [ $new_rotate_value -eq $[($default_value-90+360)%360] ] || [ $new_rotate_value -eq $[($default_value+90+360)%360] ]; then
+sudo sed -i -e ''"$liner"'s/'"$strr"'/hdmi_cvt '"$height"' '"$width"'/' /boot/config.txt
+fi
+fi
+fi
+
+#setting touch screen rotate
+if [ $touch_type = "resistance" ]; then 
+if [ $new_rotate_value -eq 0 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-0 /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 90 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-90 /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 180 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-180 /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 270 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-270 /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 360 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-FLIP-H /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to flip horizontally"
+elif [ $new_rotate_value -eq 450 ]; then
+cp $cur_dir/usr/99-calibration.conf-$device_id-FLIP-V /etc/X11/xorg.conf.d/99-calibration.conf
+echo "LCD rotate value is set to flip vertically"
+fi
+elif [ $touch_type = "capacity" ]; then
+if [ $new_rotate_value -eq 0 ]; then
+cp $cur_dir/usr/40-libinput.conf-0 /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 90 ]; then
+cp $cur_dir/usr/40-libinput.conf-90 /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 180 ]; then
+cp $cur_dir/usr/40-libinput.conf-180 /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 270 ]; then
+cp $cur_dir/usr/40-libinput.conf-270 /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to $1"
+elif [ $new_rotate_value -eq 360 ]; then
+cp $cur_dir/usr/40-libinput.conf-FLIP-H /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to flip horizontally"
+elif [ $new_rotate_value -eq 450 ]; then
+cp $cur_dir/usr/40-libinput.conf-FLIP-V /etc/X11/xorg.conf.d/40-libinput.conf
+echo "LCD rotate value is set to flip vertically"
+fi
+else
+echo "Invalid touch type"
+exit
+fi
+
+sudo sync
+sudo sync
+
+echo "reboot now"
+sleep 1
+sudo reboot
+
@@ -0,0 +1,86 @@
+#!/bin/bash
+if [ ! -d "./.system_backup" ]; then
+sudo mkdir ./.system_backup
+fi
+
+sudo rm -rf ./.system_backup/*
+
+if [ -f /etc/X11/xorg.conf.d/99-calibration.conf ]; then
+sudo cp -rf /etc/X11/xorg.conf.d/99-calibration.conf ./.system_backup
+sudo rm -rf /etc/X11/xorg.conf.d/99-calibration.conf
+fi
+
+if [ -f /etc/X11/xorg.conf.d/40-libinput.conf ]; then
+sudo cp -rf /etc/X11/xorg.conf.d/40-libinput.conf ./.system_backup
+sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf
+fi
+
+if [ -d /etc/X11/xorg.conf.d ]; then
+sudo mkdir -p ./.system_backup/xorg.conf.d
+sudo rm -rf /etc/X11/xorg.conf.d
+fi
+
+result=`grep -rn "^dtoverlay=" /boot/config.txt | grep ":rotate=" | tail -n 1`
+if [ $? -eq 0 ]; then
+str=`echo -n $result | awk -F: '{printf $2}' | awk -F= '{printf $NF}'`
+if [ -f /boot/overlays/$str-overlay.dtb ]; then
+sudo cp -rf /boot/overlays/$str-overlay.dtb ./.system_backup
+sudo rm -rf /boot/overlays/$str-overlay.dtb
+fi
+if [ -f /boot/overlays/$str.dtbo ]; then
+sudo cp -rf /boot/overlays/$str.dtbo ./.system_backup
+sudo rm -rf /boot/overlays/$str.dtbo
+fi
+fi
+
+root_dev=`grep -oPr "root=[^\s]*" /boot/cmdline.txt | awk -F= '{printf $NF}'`
+sudo cp -rf /boot/config.txt ./.system_backup
+sudo cp -rf /boot/cmdline.txt ./.system_backup/
+if test "$root_dev" = "/dev/mmcblk0p7";then
+sudo cp -rf ./boot/config-noobs-nomal.txt /boot/config.txt
+sudo cp -rf ./usr/cmdline.txt-noobs-original /boot/cmdline.txt
+else
+sudo cp -rf ./boot/config-nomal.txt /boot/config.txt
+sudo cp -rf ./usr/cmdline.txt-original /boot/cmdline.txt
+fi
+sudo cp -rf /usr/share/X11/xorg.conf.d/99-fbturbo.conf ./.system_backup/
+sudo cp -rf ./usr/99-fbturbo.conf-original /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+sudo cp -rf /etc/rc.local ./.system_backup/
+sudo cp -rf ./etc/rc.local-original /etc/rc.local
+
+if [ -f /etc/inittab ]; then
+sudo cp -rf /etc/inittab ./.system_backup
+sudo rm -rf /etc/inittab
+fi
+
+type fbcp > /dev/null 2>&1
+if [ $? -eq 0 ]; then
+sudo touch ./.system_backup/have_fbcp
+sudo rm -rf /usr/local/bin/fbcp
+fi
+
+#type cmake > /dev/null 2>&1
+#if [ $? -eq 0 ]; then
+#sudo touch ./.system_backup/have_cmake
+#sudo apt-get purge cmake -y 2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+#fi
+
+if [ -f /usr/share/X11/xorg.conf.d/10-evdev.conf ]; then
+sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf ./.system_backup
+sudo dpkg -P xserver-xorg-input-evdev
+#sudo apt-get purge xserver-xorg-input-evdev -y  2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+fi
+
+if [ -f /usr/share/X11/xorg.conf.d/45-evdev.conf ]; then
+sudo cp -rf /usr/share/X11/xorg.conf.d/45-evdev.conf ./.system_backup
+sudo rm -rf /usr/share/X11/xorg.conf.d/45-evdev.conf
+fi
+
+if [ -f ./.have_installed ]; then
+sudo cp -rf ./.have_installed ./.system_backup
+sudo rm -rf ./.have_installed
+fi
@@ -0,0 +1,96 @@
+#!/bin/bash
+#Just finished the system, no need to restore
+if [ ! -d "./.system_backup" ]; then
+echo "The system is the original version and does not need to be restored"
+exit
+fi
+
+if [ -d /etc/X11/xorg.conf.d ]; then
+sudo rm -rf /etc/X11/xorg.conf.d
+fi
+if [ -d ./.system_backup/xorg.conf.d ]; then
+sudo cp -rf ./.system_backup/xorg.conf.d /etc/X11
+if [ -f ./.system_backup/99-calibration.conf ]; then
+sudo cp -rf ./.system_backup/99-calibration.conf /etc/X11/xorg.conf.d
+fi
+if [ -f ./.system_backup/40-libinput.conf ]; then
+sudo cp -rf ./.system_backup/40-libinput.conf /etc/X11/xorg.conf.d
+fi
+fi
+
+result=`grep -rn "^dtoverlay=" /boot/config.txt | grep ":rotate=" | tail -n 1`
+if [ $? -eq 0 ]; then
+str=`echo -n $result | awk -F: '{printf $2}' | awk -F= '{printf $NF}'`
+sudo rm -rf /boot/overlays/$str-overlay.dtb
+sudo rm -rf /boot/overlays/$str.dtbo
+fi
+ls -al ./.system_backup/*.dtb > /dev/null 2>&1 && sudo cp -rf ./.system_backup/*.dtb  /boot/overlays/
+ls -al ./.system_backup/*.dtbo > /dev/null 2>&1 && sudo cp -rf ./.system_backup/*.dtbo  /boot/overlays/
+
+sudo cp -rf ./.system_backup/99-fbturbo.conf /usr/share/X11/xorg.conf.d
+sudo cp -rf ./.system_backup/cmdline.txt /boot/
+sudo cp -rf ./.system_backup/config.txt /boot/
+sudo cp -rf ./.system_backup/rc.local /etc/
+
+if [ -f /etc/inittab ]; then
+sudo rm -rf /etc/inittab
+fi
+if [ -f ./.system_backup/inittab ]; then
+sudo cp -rf ./.system_backup/inittab  /etc
+fi
+
+type fbcp > /dev/null 2>&1
+if [ $? -eq 0 ]; then
+sudo rm -rf /usr/local/bin/fbcp
+fi
+if [ -f ./.system_backup/have_fbcp ]; then
+sudo install ./rpi-fbcp/build/fbcp /usr/local/bin/fbcp
+fi
+
+#type cmake > /dev/null 2>&1
+#if [ $? -eq 0 ]; then
+#sudo apt-get purge cmake -y 2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+#fi
+#if [ -f ./.system_backup/have_cmake ]; then
+#sudo apt-get install cmake -y 2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+#fi
+
+if [ -f /usr/share/X11/xorg.conf.d/10-evdev.conf ]; then
+sudo dpkg -P xserver-xorg-input-evdev
+#sudo apt-get purge xserver-xorg-input-evdev -y 2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+fi
+if [ -f ./.system_backup/10-evdev.conf ]; then
+sudo dpkg -i -B ./xserver-xorg-input-evdev_2.10.5-1_armhf.deb
+#sudo apt-get install xserver-xorg-input-evdev -y 2> error_output.txt
+#result=`cat ./error_output.txt`
+#echo -e "\033[31m$result\033[0m"
+fi
+
+if [ -f /usr/share/X11/xorg.conf.d/45-evdev.conf ]; then
+sudo rm -rf /usr/share/X11/xorg.conf.d/45-evdev.conf
+fi
+if [ -f ./.system_backup/45-evdev.conf ]; then
+sudo cp -rf ./.system_backup/45-evdev.conf /usr/share/X11/xorg.conf.d
+fi
+
+if [ -f ./.have_installed ]; then
+sudo rm -rf ./.have_installed
+fi
+if [ -f ./.system_backup/.have_installed ]; then
+sudo cp -rf ./.system_backup/.have_installed ./
+fi
+
+sudo sync
+sudo sync
+
+echo "The system has been restored"
+echo "now reboot"
+sleep 1
+
+sudo reboot
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "1 0 0 0 1 0 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "0 -1 1 1 0 0 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "-1 0 1 0 1 0 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,36 @@
+# Match on all types of devices but tablet devices and joysticks
+Section "InputClass"
+        Identifier "libinput pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchpad catchall"
+        MatchIsTouchpad "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput touchscreen catchall"
+        MatchIsTouchscreen "on"
+	Option "CalibrationMatrix" "1 0 0 0 -1 1 0 0 1"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
+
+Section "InputClass"
+        Identifier "libinput tablet catchall"
+        MatchIsTablet "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "libinput"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3639 145 192 3794"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3770 171 239 3892"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "155 3865 115 3700"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3865 155 3700 115"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "115 3700 3865 155"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3700 115 155 3865"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "268 3880 227 3936"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3880 268 3936 227"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "227 3936 3880 268"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3936 227 268 3880"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3945 233 3939 183"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "233 3945 183 3939"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "183 3939 3945 233"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3939 183 233 3945"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "233 3945 3939 183"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3945 233 183 3939"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "72 3916 182 4012"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3916 72 4012 182"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "4012 182 72 3916"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "182 4012 3916 72"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3916 72 182 4012"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "72 3916 4012 182"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "535 3860 254 3883"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "140 3951 261 3998"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3951 140 3998 261"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3998 261 140 3951"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "261 3998 3951 140"
+        Option  "SwapAxes"      "1"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3951 140 261 3998"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "140 3951 3998 261"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "深圳市全动电子技术有限公司 ByQDtech 触控USB鼠标"
+        Option  "Calibration"   "0 1024 0 600"
+        Option  "SwapAxes"      "0"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3697 135 136 3839"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3901 158 212 3713"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "158 3901 3713 212"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "212 3713 158 3901"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3713 212 3901 158"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "268 3880 227 3936"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3880 268 3936 227"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "227 3936 3880 268"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3936 227 268 3880"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "268 3880 227 3936"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3880 268 3936 227"
+        Option  "SwapAxes"      "0"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "227 3936 3880 268"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,9 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "ADS7846 Touchscreen"
+        Option  "Calibration"   "3936 227 268 3880"
+        Option  "SwapAxes"      "1"
+        Option "EmulateThirdButton" "1"
+        Option "EmulateThirdButtonTimeout" "1000"
+        Option "EmulateThirdButtonMoveThreshold" "300"
+EndSection
@@ -0,0 +1,16 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13/A20 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb0"
+
+        Option          "SwapbuffersWait" "true"
+EndSection
@@ -0,0 +1,16 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13/A20 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb1"
+
+        Option          "SwapbuffersWait" "true"
+EndSection
@@ -0,0 +1,16 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13/A20 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb0"
+
+        Option          "SwapbuffersWait" "true"
+EndSection
@@ -0,0 +1,17 @@
+# This is a minimal sample config file, which can be copied to
+# /etc/X11/xorg.conf in order to make the Xorg server pick up
+# and load xf86-video-fbturbo driver installed in the system.
+#
+# When troubleshooting, check /var/log/Xorg.0.log for the debugging
+# output and error messages.
+#
+# Run "man fbturbo" to get additional information about the extra
+# configuration options for tuning the driver.
+
+Section "Device"
+        Identifier      "Allwinner A10/A13 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb0"
+
+        Option          "SwapbuffersWait" "true"
+EndSection
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=f27bf3fc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
@@ -0,0 +1,72 @@
+# /etc/inittab: init(8) configuration.
+# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
+
+# The default runlevel.
+id:2:initdefault:
+
+# Boot-time system configuration/initialization script.
+# This is run first except when booting in emergency (-b) mode.
+si::sysinit:/etc/init.d/rcS
+
+# What to do in single-user mode.
+~~:S:wait:/sbin/sulogin
+
+# /etc/init.d executes the S and K scripts upon change
+# of runlevel.
+#
+# Runlevel 0 is halt.
+# Runlevel 1 is single-user.
+# Runlevels 2-5 are multi-user.
+# Runlevel 6 is reboot.
+
+l0:0:wait:/etc/init.d/rc 0
+l1:1:wait:/etc/init.d/rc 1
+l2:2:wait:/etc/init.d/rc 2
+l3:3:wait:/etc/init.d/rc 3
+l4:4:wait:/etc/init.d/rc 4
+l5:5:wait:/etc/init.d/rc 5
+l6:6:wait:/etc/init.d/rc 6
+# Normally not reached, but fallthrough in case of emergency.
+z6:6:respawn:/sbin/sulogin
+
+# What to do when CTRL-ALT-DEL is pressed.
+ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
+
+# Action on special keypress (ALT-UpArrow).
+#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
+
+# What to do when the power fails/returns.
+pf::powerwait:/etc/init.d/powerfail start
+pn::powerfailnow:/etc/init.d/powerfail now
+po::powerokwait:/etc/init.d/powerfail stop
+
+# /sbin/getty invocations for the runlevels.
+#
+# The "id" field MUST be the same as the last
+# characters of the device (after "tty").
+#
+# Format:
+#  <id>:<runlevels>:<action>:<process>
+#
+# Note that on most Debian systems tty7 is used by the X Window System,
+# so if you want to add more getty's go ahead but skip tty7 if you run X.
+#
+1:2345:respawn:/sbin/getty --noclear 38400 tty1 
+2:23:respawn:/sbin/getty 38400 tty2
+3:23:respawn:/sbin/getty 38400 tty3
+4:23:respawn:/sbin/getty 38400 tty4
+5:23:respawn:/sbin/getty 38400 tty5
+6:23:respawn:/sbin/getty 38400 tty6
+
+# Example how to put a getty on a serial line (for a terminal)
+#
+#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
+#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
+
+# Example how to put a getty on a modem line.
+#
+#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
+
+
+#Spawn a getty on Raspberry Pi serial line
+T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
@@ -0,0 +1,13 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+
+snd-bcm2835
+i2c-bcm2708  
+i2c-dev
+
+#flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
+#fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
+#ads7846_device model=7846 cs=1 gpio_pendown=17  keep_vref_on=1 swap_xy=1 pressure_max=255 x_plate_ohms=60 x_min=200 x_max=3900 y_min=200 y_max=3900
				`@@ -0,0 +1 @@`
				`dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo`
				`@@ -0,0 +1 @@`
				`dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles`