/*-
* Public platform independent Near Field Communication (NFC) library
*
* Copyright (C) 2009, Roel Verdult, Romuald Conty
* Copyright (C) 2010, Roel Verdult, Romuald Conty, Romain Tartière
*
* This program is free software: you can redistribute it and/or modify it
* under the terms of the GNU Lesser General Public License as published by the
* Free Software Foundation, either version 3 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see
*/
/**
* @file pn53x.h
* @brief PN531, PN532 and PN533 common functions
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif // HAVE_CONFIG_H
#include
#include
#include
#include
#include
#include
#include "pn53x.h"
#include "../mirror-subr.h"
#ifdef _WIN32
# include
# define strdup _strdup
# define snprintf sprintf_s
#endif
#define MAX(a,b) (((a) > (b)) ? (a) : (b))
// PN53X configuration
const byte_t pncmd_get_firmware_version[2] = { 0xD4, 0x02 };
const byte_t pncmd_get_general_status[2] = { 0xD4, 0x04 };
const byte_t pncmd_get_register[4] = { 0xD4, 0x06 };
const byte_t pncmd_set_register[5] = { 0xD4, 0x08 };
const byte_t pncmd_set_parameters[3] = { 0xD4, 0x12 };
const byte_t pncmd_rf_configure[14] = { 0xD4, 0x32 };
// Reader
const byte_t pncmd_initiator_list_passive[264] = { 0xD4, 0x4A };
const byte_t pncmd_initiator_jump_for_dep[68] = { 0xD4, 0x56 };
const byte_t pncmd_initiator_select[3] = { 0xD4, 0x54 };
const byte_t pncmd_initiator_deselect[3] = { 0xD4, 0x44, 0x00 };
const byte_t pncmd_initiator_release[3] = { 0xD4, 0x52, 0x00 };
const byte_t pncmd_initiator_set_baud_rate[5] = { 0xD4, 0x4E };
const byte_t pncmd_initiator_exchange_data[265] = { 0xD4, 0x40 };
const byte_t pncmd_initiator_exchange_raw_data[266] = { 0xD4, 0x42 };
const byte_t pncmd_initiator_auto_poll[5] = { 0xD4, 0x60 };
// Target
const byte_t pncmd_target_get_data[2] = { 0xD4, 0x86 };
const byte_t pncmd_target_set_data[264] = { 0xD4, 0x8E };
const byte_t pncmd_target_init[2] = { 0xD4, 0x8C };
//Example of default values for PN532 or PN533:
//const byte_t pncmd_target_init[39] = { 0xD4, 0x8C, 0x00, 0x08, 0x00, 0x12, 0x34, 0x56, 0x40, 0x01, 0xFE, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xFF, 0xFF, 0xAA, 0x99, 0x88, 0x77, 0x66, 0x55, 0x44, 0x33, 0x22, 0x11, 0x00, 0x00 };
const byte_t pncmd_target_virtual_card[4] = { 0xD4, 0x14 };
const byte_t pncmd_target_receive[2] = { 0xD4, 0x88 };
const byte_t pncmd_target_send[264] = { 0xD4, 0x90 };
const byte_t pncmd_target_get_status[2] = { 0xD4, 0x8A };
static const byte_t pn53x_ack_frame[] = { 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 };
static const byte_t pn53x_nack_frame[] = { 0x00, 0x00, 0xff, 0xff, 0x00, 0x00 };
static const byte_t pn53x_error_frame[] = { 0x00, 0x00, 0xff, 0x01, 0xff, 0x7f, 0x81, 0x00 };
/* prototypes */
const nfc_modulation_t pn53x_ptt_to_nm( const pn53x_target_type_t ptt );
const pn53x_modulation_t pn53x_nm_to_pm(const nfc_modulation_t nm);
const pn53x_target_type_t pn53x_nm_to_ptt(const nfc_modulation_t nm);
bool
pn53x_init(nfc_device_t * pnd)
{
// CRC handling is enabled by default
pnd->bCrc = true;
// Parity handling is enabled by default
pnd->bPar = true;
// Reset the ending transmission bits register, it is unknown what the last tranmission used there
pnd->ui8TxBits = 0;
if (!pn53x_set_reg (pnd, REG_CIU_BIT_FRAMING, SYMBOL_TX_LAST_BITS, 0x00)) {
return false;
}
// We can't read these parameters, so we set a default config by using the SetParameters wrapper
// Note: pn53x_SetParameters() will save the sent value in pnd->ui8Parameters cache
if(!pn53x_SetParameters(pnd, PARAM_AUTO_ATR_RES | PARAM_AUTO_RATS)) {
return false;
}
char abtFirmwareText[18];
if (!pn53x_get_firmware_version (pnd, abtFirmwareText)) {
return false;
}
// Add the firmware revision to the device name
char *pcName;
pcName = strdup (pnd->acName);
snprintf (pnd->acName, DEVICE_NAME_LENGTH - 1, "%s - %s", pcName, abtFirmwareText);
free (pcName);
return true;
}
bool
pn53x_check_ack_frame_callback (nfc_device_t * pnd, const byte_t * pbtRxFrame, const size_t szRxFrameLen)
{
if (szRxFrameLen >= sizeof (pn53x_ack_frame)) {
if (0 == memcmp (pbtRxFrame, pn53x_ack_frame, sizeof (pn53x_ack_frame))) {
DBG ("%s", "PN53x ACKed");
return true;
} else if (0 == memcmp (pbtRxFrame, pn53x_nack_frame, sizeof (pn53x_nack_frame))) {
DBG ("%s", "PN53x NACKed");
// TODO Try to recover when PN53x NACKs !
// A counter could allow the command to be sent again (e.g. max 3 times)
pnd->iLastError = DENACK;
return false;
}
}
pnd->iLastError = DEACKMISMATCH;
ERR ("%s", "Unexpected PN53x reply!");
#if defined(DEBUG)
// coredump so that we can have a backtrace about how this code was reached.
abort ();
#endif
return false;
}
bool
pn53x_check_error_frame_callback (nfc_device_t * pnd, const byte_t * pbtRxFrame, const size_t szRxFrameLen)
{
if (szRxFrameLen >= sizeof (pn53x_error_frame)) {
if (0 == memcmp (pbtRxFrame, pn53x_error_frame, sizeof (pn53x_error_frame))) {
DBG ("%s", "PN53x sent an error frame");
pnd->iLastError = DEISERRFRAME;
return false;
}
}
return true;
}
bool
pn53x_transceive (nfc_device_t * pnd, const byte_t * pbtTx, const size_t szTx, byte_t * pbtRx, size_t * pszRx)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
// Check if receiving buffers are available, if not, replace them
if (!pszRx || !pbtRx) {
pbtRx = abtRx;
pszRx = &szRx;
}
*pszRx = MAX_FRAME_LEN;
// Call the transceive callback function of the current device
if (!pnd->pdc->transceive (pnd, pbtTx, szTx, pbtRx, pszRx))
return false;
// TODO Put all these hex-coded command behind a human-readable #define (1.6.x)
// Should be proceed while we will fix Issue 110 (Rework the way that pn53x commands are built)
switch (pbtTx[1]) {
case 0x16: // PowerDown
case 0x40: // InDataExchange
case 0x42: // InCommunicateThru
case 0x44: // InDeselect
case 0x46: // InJumpForPSL
case 0x4e: // InPSL
case 0x50: // InATR
case 0x52: // InRelease
case 0x54: // InSelect
case 0x56: // InJumpForDEP
case 0x86: // TgGetData
case 0x88: // TgGetInitiatorCommand
case 0x8e: // TgSetData
case 0x90: // TgResponseToInitiator
case 0x92: // TgSetGeneralBytes
case 0x94: // TgSetMetaData
pnd->iLastError = pbtRx[0] & 0x3f;
break;
default:
pnd->iLastError = 0;
}
return (0 == pnd->iLastError);
}
bool
pn53x_get_reg (nfc_device_t * pnd, uint16_t ui16Reg, uint8_t * ui8Value)
{
size_t szValueLen;
byte_t abtCmd[sizeof (pncmd_get_register)];
memcpy (abtCmd, pncmd_get_register, sizeof (pncmd_get_register));
abtCmd[2] = ui16Reg >> 8;
abtCmd[3] = ui16Reg & 0xff;
if (pn53x_transceive (pnd, abtCmd, sizeof (pncmd_get_register), ui8Value, &szValueLen)) {
if (pnd->nc == NC_PN533) {
// PN533 prepends its answer by a status byte
if (ui8Value[0] == 0) {
ui8Value[0] = ui8Value[1];
} else {
return false;
}
}
return true;
}
return false;
}
bool
pn53x_set_reg (nfc_device_t * pnd, uint16_t ui16Reg, uint8_t ui8SymbolMask, uint8_t ui8Value)
{
uint8_t ui8Current;
byte_t abtCmd[sizeof (pncmd_set_register)];
memcpy (abtCmd, pncmd_set_register, sizeof (pncmd_set_register));
abtCmd[2] = ui16Reg >> 8;
abtCmd[3] = ui16Reg & 0xff;
if (!pn53x_get_reg (pnd, ui16Reg, &ui8Current))
return false;
abtCmd[4] = ui8Value | (ui8Current & (~ui8SymbolMask));
return (abtCmd[4] != ui8Current) ? pn53x_transceive (pnd, abtCmd, sizeof (pncmd_set_register), NULL, NULL) : true;
}
bool
pn53x_set_parameter (nfc_device_t * pnd, const uint8_t ui8Parameter, const bool bEnable)
{
uint8_t ui8Value = (bEnable) ? (pnd->ui8Parameters | ui8Parameter) : (pnd->ui8Parameters & ~(ui8Parameter));
if (ui8Value != pnd->ui8Parameters) {
return pn53x_SetParameters(pnd, ui8Value);
}
return true;
}
bool
pn53x_SetParameters (nfc_device_t * pnd, const uint8_t ui8Value)
{
byte_t abtCmd[sizeof (pncmd_set_parameters)];
memcpy (abtCmd, pncmd_set_parameters, sizeof (pncmd_set_parameters));
abtCmd[2] = ui8Value;
if(!pn53x_transceive (pnd, abtCmd, sizeof (pncmd_set_parameters), NULL, NULL)) {
return false;
}
// We save last parameters in register cache
pnd->ui8Parameters = ui8Value;
return true;
}
bool
pn53x_set_tx_bits (nfc_device_t * pnd, const uint8_t ui8Bits)
{
// Test if we need to update the transmission bits register setting
if (pnd->ui8TxBits != ui8Bits) {
// Set the amount of transmission bits in the PN53X chip register
if (!pn53x_set_reg (pnd, REG_CIU_BIT_FRAMING, SYMBOL_TX_LAST_BITS, ui8Bits))
return false;
// Store the new setting
((nfc_device_t *) pnd)->ui8TxBits = ui8Bits;
}
return true;
}
bool
pn53x_wrap_frame (const byte_t * pbtTx, const size_t szTxBits, const byte_t * pbtTxPar,
byte_t * pbtFrame, size_t * pszFrameBits)
{
byte_t btFrame;
byte_t btData;
uint32_t uiBitPos;
uint32_t uiDataPos = 0;
size_t szBitsLeft = szTxBits;
// Make sure we should frame at least something
if (szBitsLeft == 0)
return false;
// Handle a short response (1byte) as a special case
if (szBitsLeft < 9) {
*pbtFrame = *pbtTx;
*pszFrameBits = szTxBits;
return true;
}
// We start by calculating the frame length in bits
*pszFrameBits = szTxBits + (szTxBits / 8);
// Parse the data bytes and add the parity bits
// This is really a sensitive process, mirror the frame bytes and append parity bits
// buffer = mirror(frame-byte) + parity + mirror(frame-byte) + parity + ...
// split "buffer" up in segments of 8 bits again and mirror them
// air-bytes = mirror(buffer-byte) + mirror(buffer-byte) + mirror(buffer-byte) + ..
while (true) {
// Reset the temporary frame byte;
btFrame = 0;
for (uiBitPos = 0; uiBitPos < 8; uiBitPos++) {
// Copy as much data that fits in the frame byte
btData = mirror (pbtTx[uiDataPos]);
btFrame |= (btData >> uiBitPos);
// Save this frame byte
*pbtFrame = mirror (btFrame);
// Set the remaining bits of the date in the new frame byte and append the parity bit
btFrame = (btData << (8 - uiBitPos));
btFrame |= ((pbtTxPar[uiDataPos] & 0x01) << (7 - uiBitPos));
// Backup the frame bits we have so far
pbtFrame++;
*pbtFrame = mirror (btFrame);
// Increase the data (without parity bit) position
uiDataPos++;
// Test if we are done
if (szBitsLeft < 9)
return true;
szBitsLeft -= 8;
}
// Every 8 data bytes we lose one frame byte to the parities
pbtFrame++;
}
}
bool
pn53x_unwrap_frame (const byte_t * pbtFrame, const size_t szFrameBits, byte_t * pbtRx, size_t * pszRxBits,
byte_t * pbtRxPar)
{
byte_t btFrame;
byte_t btData;
uint8_t uiBitPos;
uint32_t uiDataPos = 0;
byte_t *pbtFramePos = (byte_t *) pbtFrame;
size_t szBitsLeft = szFrameBits;
// Make sure we should frame at least something
if (szBitsLeft == 0)
return false;
// Handle a short response (1byte) as a special case
if (szBitsLeft < 9) {
*pbtRx = *pbtFrame;
*pszRxBits = szFrameBits;
return true;
}
// Calculate the data length in bits
*pszRxBits = szFrameBits - (szFrameBits / 9);
// Parse the frame bytes, remove the parity bits and store them in the parity array
// This process is the reverse of WrapFrame(), look there for more info
while (true) {
for (uiBitPos = 0; uiBitPos < 8; uiBitPos++) {
btFrame = mirror (pbtFramePos[uiDataPos]);
btData = (btFrame << uiBitPos);
btFrame = mirror (pbtFramePos[uiDataPos + 1]);
btData |= (btFrame >> (8 - uiBitPos));
pbtRx[uiDataPos] = mirror (btData);
if (pbtRxPar != NULL)
pbtRxPar[uiDataPos] = ((btFrame >> (7 - uiBitPos)) & 0x01);
// Increase the data (without parity bit) position
uiDataPos++;
// Test if we are done
if (szBitsLeft < 9)
return true;
szBitsLeft -= 9;
}
// Every 8 data bytes we lose one frame byte to the parities
pbtFramePos++;
}
}
bool
pn53x_decode_target_data (const byte_t * pbtRawData, size_t szRawData, nfc_chip_t nc, nfc_modulation_type_t nmt,
nfc_target_info_t * pnti)
{
uint8_t szAttribRes;
switch (nmt) {
case NMT_ISO14443A:
// We skip the first byte: its the target number (Tg)
pbtRawData++;
// Somehow they switched the lower and upper ATQA bytes around for the PN531 chipset
if (nc == NC_PN531) {
pnti->nai.abtAtqa[1] = *(pbtRawData++);
pnti->nai.abtAtqa[0] = *(pbtRawData++);
} else {
pnti->nai.abtAtqa[0] = *(pbtRawData++);
pnti->nai.abtAtqa[1] = *(pbtRawData++);
}
pnti->nai.btSak = *(pbtRawData++);
// Copy the NFCID1
pnti->nai.szUidLen = *(pbtRawData++);
memcpy (pnti->nai.abtUid, pbtRawData, pnti->nai.szUidLen);
pbtRawData += pnti->nai.szUidLen;
// Did we received an optional ATS (Smardcard ATR)
if (szRawData > (pnti->nai.szUidLen + 5)) {
pnti->nai.szAtsLen = ((*(pbtRawData++)) - 1); // In pbtRawData, ATS Length byte is counted in ATS Frame.
memcpy (pnti->nai.abtAts, pbtRawData, pnti->nai.szAtsLen);
} else {
pnti->nai.szAtsLen = 0;
}
// Strip CT (Cascade Tag) to retrieve and store the _real_ UID
// (e.g. 0x8801020304050607 is in fact 0x01020304050607)
if ((pnti->nai.szUidLen == 8) && (pnti->nai.abtUid[0] == 0x88)) {
pnti->nai.szUidLen = 7;
memmove (pnti->nai.abtUid, pnti->nai.abtUid + 1, 7);
} else if ((pnti->nai.szUidLen == 12) && (pnti->nai.abtUid[0] == 0x88) && (pnti->nai.abtUid[4] == 0x88)) {
pnti->nai.szUidLen = 10;
memmove (pnti->nai.abtUid, pnti->nai.abtUid + 1, 3);
memmove (pnti->nai.abtUid + 3, pnti->nai.abtUid + 5, 7);
}
break;
case NMT_ISO14443B:
// We skip the first byte: its the target number (Tg)
pbtRawData++;
// Now we are in ATQB, we skip the first ATQB byte always equal to 0x50
pbtRawData++;
// Store the PUPI (Pseudo-Unique PICC Identifier)
memcpy (pnti->nbi.abtPupi, pbtRawData, 4);
pbtRawData += 4;
// Store the Application Data
memcpy (pnti->nbi.abtApplicationData, pbtRawData, 4);
pbtRawData += 4;
// Store the Protocol Info
memcpy (pnti->nbi.abtProtocolInfo, pbtRawData, 3);
pbtRawData += 3;
// We leave the ATQB field, we now enter in Card IDentifier
szAttribRes = *(pbtRawData++);
if (szAttribRes) {
pnti->nbi.ui8CardIdentifier = *(pbtRawData++);
}
break;
case NMT_FELICA:
// We skip the first byte: its the target number (Tg)
pbtRawData++;
// Store the mandatory info
pnti->nfi.szLen = *(pbtRawData++);
pnti->nfi.btResCode = *(pbtRawData++);
// Copy the NFCID2t
memcpy (pnti->nfi.abtId, pbtRawData, 8);
pbtRawData += 8;
// Copy the felica padding
memcpy (pnti->nfi.abtPad, pbtRawData, 8);
pbtRawData += 8;
// Test if the System code (SYST_CODE) is available
if (pnti->nfi.szLen > 18) {
memcpy (pnti->nfi.abtSysCode, pbtRawData, 2);
}
break;
case NMT_JEWEL:
// We skip the first byte: its the target number (Tg)
pbtRawData++;
// Store the mandatory info
memcpy (pnti->nji.btSensRes, pbtRawData, 2);
pbtRawData += 2;
memcpy (pnti->nji.btId, pbtRawData, 4);
break;
default:
return false;
break;
}
return true;
}
bool
pn53x_initiator_select_passive_target (nfc_device_t * pnd,
const nfc_modulation_t nm,
const byte_t * pbtInitData, const size_t szInitData,
nfc_target_t * pnt)
{
size_t szTargetsData;
byte_t abtTargetsData[MAX_FRAME_LEN];
const pn53x_modulation_t pm = pn53x_nm_to_pm(nm);
if (PM_UNDEFINED == pm) {
pnd->iLastError = DENOTSUP;
return false;
}
if (!pn53x_InListPassiveTarget (pnd, pm, 1, pbtInitData, szInitData, abtTargetsData, &szTargetsData))
return false;
// Make sure one tag has been found, the PN53X returns 0x00 if none was available
if (abtTargetsData[0] == 0)
return false;
// Is a tag info struct available
if (pnt) {
pnt->nm = nm;
// Fill the tag info struct with the values corresponding to this init modulation
if (!pn53x_decode_target_data (abtTargetsData + 1, szTargetsData - 1, pnd->nc, nm.nmt, &(pnt->nti))) {
return false;
}
}
return true;
}
bool
pn53x_initiator_poll_targets (nfc_device_t * pnd,
const nfc_modulation_t * pnmModulations, const size_t szModulations,
const byte_t btPollNr, const byte_t btPeriod,
nfc_target_t * pntTargets, size_t * pszTargetFound)
{
size_t szTargetTypes = 0;
pn53x_target_type_t apttTargetTypes[32];
for (size_t n=0; niLastError = DENOTSUP;
return false;
}
apttTargetTypes[szTargetTypes] = ptt;
if ((pnd->bAutoIso14443_4) && (ptt == PTT_MIFARE)) { // Hack to have ATS
apttTargetTypes[szTargetTypes] = PTT_ISO14443_4A_106;
szTargetTypes++;
apttTargetTypes[szTargetTypes] = PTT_MIFARE;
}
szTargetTypes++;
}
return pn53x_InAutoPoll (pnd, apttTargetTypes, szTargetTypes, btPollNr, btPeriod, pntTargets, pszTargetFound);
}
/**
* @brief C wrapper to InListPassiveTarget command
* @return true if command is successfully sent
*
* @param pnd nfc_device_t struct pointer that represent currently used device
* @param pmInitModulation Desired modulation
* @param pbtInitiatorData Optional initiator data used for Felica, ISO14443B, Topaz Polling or for ISO14443A selecting a specific UID
* @param szInitiatorData Length of initiator data \a pbtInitiatorData
* @param pbtTargetsData pointer on a pre-allocated byte array to receive TargetData[n] as described in pn53x user manual
* @param pszTargetsData size_t pointer where size of \a pbtTargetsData will be written
*
* @note Selected targets count can be found in \a pbtTargetsData[0] if available (i.e. \a pszTargetsData content is more than 0)
* @note To decode theses TargetData[n], there is @fn pn53x_decode_target_data
*/
bool
pn53x_InListPassiveTarget (nfc_device_t * pnd,
const pn53x_modulation_t pmInitModulation, const byte_t szMaxTargets,
const byte_t * pbtInitiatorData, const size_t szInitiatorData,
byte_t * pbtTargetsData, size_t * pszTargetsData)
{
size_t szRx;
byte_t abtCmd[sizeof (pncmd_initiator_list_passive)];
memcpy (abtCmd, pncmd_initiator_list_passive, sizeof (pncmd_initiator_list_passive));
abtCmd[2] = szMaxTargets; // MaxTg
// XXX Is there is a better way to do handle supported modulations ?
switch(pmInitModulation) {
case PM_ISO14443A_106:
case PM_FELICA_212:
case PM_FELICA_424:
// all gone fine.
break;
case PM_ISO14443B_106:
if (!(pnd->btSupportByte & SUPPORT_ISO14443B)) {
// Eg. Some PN532 doesn't support type B!
pnd->iLastError = DENOTSUP;
return false;
}
break;
case PM_JEWEL_106:
if(pnd->nc == NC_PN531) {
// These modulations are not supported by pn531
pnd->iLastError = DENOTSUP;
return false;
}
break;
case PM_ISO14443B_212:
case PM_ISO14443B_424:
case PM_ISO14443B_847:
if((pnd->nc != NC_PN533) || (!(pnd->btSupportByte & SUPPORT_ISO14443B))) {
// These modulations are not supported by pn531 neither pn532
pnd->iLastError = DENOTSUP;
return false;
}
break;
default:
pnd->iLastError = DENOTSUP;
return false;
}
abtCmd[3] = pmInitModulation; // BrTy, the type of init modulation used for polling a passive tag
// Set the optional initiator data (used for Felica, ISO14443B, Topaz Polling or for ISO14443A selecting a specific UID).
if (pbtInitiatorData)
memcpy (abtCmd + 4, pbtInitiatorData, szInitiatorData);
// Try to find a tag, call the tranceive callback function of the current device
szRx = MAX_FRAME_LEN;
if (pn53x_transceive (pnd, abtCmd, 4 + szInitiatorData, pbtTargetsData, &szRx)) {
*pszTargetsData = szRx;
return true;
} else {
return false;
}
}
bool
pn53x_InDeselect (nfc_device_t * pnd, const uint8_t ui8Target)
{
byte_t abtCmd[sizeof (pncmd_initiator_deselect)];
memcpy (abtCmd, pncmd_initiator_deselect, sizeof (pncmd_initiator_deselect));
abtCmd[2] = ui8Target;
return (pn53x_transceive (pnd, abtCmd, sizeof (abtCmd), NULL, NULL));
}
bool
pn53x_InRelease (nfc_device_t * pnd, const uint8_t ui8Target)
{
byte_t abtCmd[sizeof (pncmd_initiator_release)];
memcpy (abtCmd, pncmd_initiator_release, sizeof (pncmd_initiator_release));
abtCmd[2] = ui8Target;
return (pn53x_transceive (pnd, abtCmd, sizeof (abtCmd), NULL, NULL));
}
bool
pn53x_InAutoPoll (nfc_device_t * pnd,
const pn53x_target_type_t * ppttTargetTypes, const size_t szTargetTypes,
const byte_t btPollNr, const byte_t btPeriod, nfc_target_t * pntTargets, size_t * pszTargetFound)
{
size_t szTxInAutoPoll,
n,
szRx;
byte_t abtRx[MAX_FRAME_LEN];
bool res;
byte_t *pbtTxInAutoPoll;
if (pnd->nc != NC_PN532) {
// This function is not supported by pn531 neither pn533
pnd->iLastError = DENOTSUP;
return false;
}
// InAutoPoll frame looks like this { 0xd4, 0x60, 0x0f, 0x01, 0x00 } => { direction, command, pollnr, period, types... }
szTxInAutoPoll = 4 + szTargetTypes;
pbtTxInAutoPoll = malloc (szTxInAutoPoll);
pbtTxInAutoPoll[0] = 0xd4;
pbtTxInAutoPoll[1] = 0x60;
pbtTxInAutoPoll[2] = btPollNr;
pbtTxInAutoPoll[3] = btPeriod;
for (n = 0; n < szTargetTypes; n++) {
pbtTxInAutoPoll[4 + n] = ppttTargetTypes[n];
}
szRx = MAX_FRAME_LEN;
res = pnd->pdc->transceive (pnd, pbtTxInAutoPoll, szTxInAutoPoll, abtRx, &szRx);
if ((szRx == 0) || (res == false)) {
return false;
} else {
*pszTargetFound = abtRx[0];
if (*pszTargetFound) {
uint8_t ln;
byte_t *pbt = abtRx + 1;
/* 1st target */
// Target type
pn53x_target_type_t ptt = *(pbt++);
pntTargets[0].nm = pn53x_ptt_to_nm(ptt);
// AutoPollTargetData length
ln = *(pbt++);
pn53x_decode_target_data (pbt, ln, pnd->nc, pntTargets[0].nm.nmt, &(pntTargets[0].nti));
pbt += ln;
if (abtRx[0] > 1) {
/* 2nd target */
// Target type
ptt = *(pbt++);
pntTargets[1].nm = pn53x_ptt_to_nm(ptt);
// AutoPollTargetData length
ln = *(pbt++);
pn53x_decode_target_data (pbt, ln, pnd->nc, pntTargets[1].nm.nmt, &(pntTargets[1].nti));
}
}
}
return true;
}
static struct sErrorMessage {
int iErrorCode;
const char *pcErrorMsg;
} sErrorMessages[] = {
/* Chip-level errors */
{
0x00, "Success"}, {
0x01, "Timeout"}, {
0x02, "CRC Error"}, {
0x03, "Parity Error"}, {
0x04, "Erroneous Bit Count"}, {
0x05, "Framing Error"}, {
0x06, "Bit-collision"}, {
0x07, "Buffer Too Small"}, {
0x09, "Buffer Overflow"}, {
0x0a, "Timeout"}, {
0x0b, "Protocol Error"}, {
0x0d, "Overheating"}, {
0x0e, "Internal Buffer overflow."}, {
0x10, "Invalid Parameter"},
/* DEP Errors */
{
0x12, "Unknown DEP Command"}, {
0x13, "Invalid Parameter"},
/* MIFARE */
{
0x14, "Authentication Error"},
/* */
{
0x23, "Wrong ISO/IEC14443-3 Check Byte"}, {
0x25, "Invalid State"}, {
0x26, "Operation Not Allowed"}, {
0x27, "Command Not Acceptable"}, {
0x29, "Target Released"}, {
0x2a, "Card ID Mismatch"}, {
0x2B, "Card Discarded"}, {
0x2C, "NFCID3 Mismatch"}, {
0x2D, "Over Current"}, {
0x2E, "NAD Missing in DEP Frame"},
/* Driver-level error */
{
DENACK, "Received NACK"}, {
DEACKMISMATCH, "Expected ACK/NACK"}, {
DEISERRFRAME, "Received an error frame"},
// TODO: Move me in more generic code for libnfc 1.6
{
DEINVAL, "Invalid argument"}, {
DEIO, "Input/output error"}, {
DETIMEOUT, "Operation timed-out"}, {
DENOTSUP, "Operation not supported"}
};
const char *
pn53x_strerror (const nfc_device_t * pnd)
{
const char *pcRes = "Unknown error";
size_t i;
for (i = 0; i < (sizeof (sErrorMessages) / sizeof (struct sErrorMessage)); i++) {
if (sErrorMessages[i].iErrorCode == pnd->iLastError) {
pcRes = sErrorMessages[i].pcErrorMsg;
break;
}
}
return pcRes;
}
bool
pn53x_get_firmware_version (nfc_device_t * pnd, char abtFirmwareText[18])
{
byte_t abtFw[4];
size_t szFwLen = sizeof (abtFw);
if (!pn53x_transceive (pnd, pncmd_get_firmware_version, 2, abtFw, &szFwLen)) {
// Failed to get firmware revision??, whatever...let's disconnect and clean up and return err
pnd->pdc->disconnect (pnd);
return false;
}
// Convert firmware info in text, PN531 gives 2 bytes info, but PN532 and PN533 gives 4
switch (pnd->nc) {
case NC_PN531:
snprintf (abtFirmwareText, 18, "PN531 v%d.%d", abtFw[0], abtFw[1]);
pnd->btSupportByte = SUPPORT_ISO14443A | SUPPORT_ISO18092;
break;
case NC_PN532:
snprintf (abtFirmwareText, 18, "PN532 v%d.%d (0x%02x)", abtFw[1], abtFw[2], abtFw[3]);
pnd->btSupportByte = abtFw[3];
break;
case NC_PN533:
snprintf (abtFirmwareText, 18, "PN533 v%d.%d (0x%02x)", abtFw[1], abtFw[2], abtFw[3]);
pnd->btSupportByte = abtFw[3];
break;
}
// Be sure to have a null end of string
abtFirmwareText[17] = '\0';
return true;
}
bool
pn53x_configure (nfc_device_t * pnd, const nfc_device_option_t ndo, const bool bEnable)
{
byte_t btValue;
byte_t abtCmd[sizeof (pncmd_rf_configure)];
memcpy (abtCmd, pncmd_rf_configure, sizeof (pncmd_rf_configure));
// Make sure we are dealing with a active device
if (!pnd->bActive)
return false;
switch (ndo) {
case NDO_HANDLE_CRC:
// Enable or disable automatic receiving/sending of CRC bytes
// TX and RX are both represented by the symbol 0x80
btValue = (bEnable) ? 0x80 : 0x00;
if (!pn53x_set_reg (pnd, REG_CIU_TX_MODE, SYMBOL_TX_CRC_ENABLE, btValue))
return false;
if (!pn53x_set_reg (pnd, REG_CIU_RX_MODE, SYMBOL_RX_CRC_ENABLE, btValue))
return false;
pnd->bCrc = bEnable;
break;
case NDO_HANDLE_PARITY:
// Handle parity bit by PN53X chip or parse it as data bit
btValue = (bEnable) ? 0x00 : SYMBOL_PARITY_DISABLE;
if (!pn53x_set_reg (pnd, REG_CIU_MANUAL_RCV, SYMBOL_PARITY_DISABLE, btValue))
return false;
pnd->bPar = bEnable;
break;
case NDO_EASY_FRAMING:
pnd->bEasyFraming = bEnable;
break;
case NDO_ACTIVATE_FIELD:
abtCmd[2] = RFCI_FIELD;
abtCmd[3] = (bEnable) ? 1 : 0;
if (!pn53x_transceive (pnd, abtCmd, 4, NULL, NULL))
return false;
break;
case NDO_ACTIVATE_CRYPTO1:
btValue = (bEnable) ? SYMBOL_MF_CRYPTO1_ON : 0x00;
if (!pn53x_set_reg (pnd, REG_CIU_STATUS2, SYMBOL_MF_CRYPTO1_ON, btValue))
return false;
break;
case NDO_INFINITE_SELECT:
// TODO Made some research around this point:
// timings could be tweak better than this, and maybe we can tweak timings
// to "gain" a sort-of hardware polling (ie. like PN532 does)
// Retry format: 0x00 means only 1 try, 0xff means infinite
abtCmd[2] = RFCI_RETRY_SELECT;
abtCmd[3] = (bEnable) ? 0xff : 0x00; // MxRtyATR, default: active = 0xff, passive = 0x02
abtCmd[4] = (bEnable) ? 0xff : 0x00; // MxRtyPSL, default: 0x01
abtCmd[5] = (bEnable) ? 0xff : 0x00; // MxRtyPassiveActivation, default: 0xff
if (!pn53x_transceive (pnd, abtCmd, 6, NULL, NULL))
return false;
break;
case NDO_ACCEPT_INVALID_FRAMES:
btValue = (bEnable) ? SYMBOL_RX_NO_ERROR : 0x00;
if (!pn53x_set_reg (pnd, REG_CIU_RX_MODE, SYMBOL_RX_NO_ERROR, btValue))
return false;
break;
case NDO_ACCEPT_MULTIPLE_FRAMES:
btValue = (bEnable) ? SYMBOL_RX_MULTIPLE : 0x00;
if (!pn53x_set_reg (pnd, REG_CIU_RX_MODE, SYMBOL_RX_MULTIPLE, btValue))
return false;
return true;
break;
case NDO_AUTO_ISO14443_4:
// TODO Cache activated/disactivated options
pnd->bAutoIso14443_4 = bEnable;
return pn53x_set_parameter(pnd, PARAM_AUTO_RATS, bEnable);
break;
case NDO_FORCE_ISO14443_A:
if(!bEnable) {
// Nothing to do
return true;
}
// Force pn53x to be in ISO14443-A mode
if (!pn53x_set_reg (pnd, REG_CIU_TX_MODE, SYMBOL_TX_FRAMING, 0x00)) {
return false;
}
if (!pn53x_set_reg (pnd, REG_CIU_RX_MODE, SYMBOL_RX_FRAMING, 0x00)) {
return false;
}
return true;
break;
}
// When we reach this, the configuration is completed and succesful
return true;
}
bool
pn53x_initiator_select_dep_target(nfc_device_t * pnd,
const nfc_dep_mode_t ndm, const nfc_baud_rate_t nbr,
const nfc_dep_info_t * pndiInitiator,
nfc_target_t * pnt)
{
const byte_t abtPassiveInitiatorData[5] = { 0x00, 0xff, 0xff, 0x00, 0x00 }; // Only for 212/424 kpbs: First 4 bytes shall be set like this according to NFCIP-1, last byte is TSN (Time Slot Number)
const byte_t * pbtPassiveInitiatorData = NULL;
switch (nbr) {
case NBR_212:
case NBR_424:
// Only use this predefined bytes array when we are at 212/424kbps
pbtPassiveInitiatorData = abtPassiveInitiatorData;
break;
default:
// Nothing to do
break;
}
if (pndiInitiator) {
return pn53x_InJumpForDEP (pnd, ndm, nbr, pbtPassiveInitiatorData, pndiInitiator->abtNFCID3, pndiInitiator->abtGB, pndiInitiator->szGB, pnt);
} else {
return pn53x_InJumpForDEP (pnd, ndm, nbr, pbtPassiveInitiatorData, NULL, NULL, 0, pnt);
}
}
/**
* @brief Wrapper for InJumpForDEP command
* @param pmInitModulation desired initial modulation
* @param pbtPassiveInitiatorData NFCID1 (4 bytes) at 106kbps (optionnal, see NFCIP-1: 11.2.1.26) or Polling Request Frame's payload (5 bytes) at 212/424kbps (mandatory, see NFCIP-1: 11.2.2.5)
* @param szPassiveInitiatorData size of pbtPassiveInitiatorData content
* @param pbtNFCID3i NFCID3 of the initiator
* @param pbtGBi General Bytes of the initiator
* @param szGBi count of General Bytes
* @param[out] pnt \a nfc_target_t which will be filled by this function
*/
bool
pn53x_InJumpForDEP (nfc_device_t * pnd,
const nfc_dep_mode_t ndm,
const nfc_baud_rate_t nbr,
const byte_t * pbtPassiveInitiatorData,
const byte_t * pbtNFCID3i,
const byte_t * pbtGBi, const size_t szGBi,
nfc_target_t * pnt)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
size_t offset;
byte_t abtCmd[sizeof (pncmd_initiator_jump_for_dep)];
memcpy (abtCmd, pncmd_initiator_jump_for_dep, sizeof (pncmd_initiator_jump_for_dep));
offset = 5; // 2 bytes for command, 1 byte for DEP mode (Active/Passive), 1 byte for baud rate, 1 byte for following parameters flag
abtCmd[2] = (ndm == NDM_ACTIVE) ? 0x01 : 0x00;
switch (nbr) {
case NBR_106:
abtCmd[3] = 0x00; // baud rate is 106 kbps
break;
case NBR_212:
abtCmd[3] = 0x01; // baud rate is 212 kbps
break;
case NBR_424:
abtCmd[3] = 0x02; // baud rate is 424 kbps
break;
case NBR_847:
case NBR_UNDEFINED:
// XXX Maybe we should put a "syntax error" or sth like that
pnd->iLastError = DENOTSUP;
return false;
break;
}
if (pbtPassiveInitiatorData && (ndm == NDM_PASSIVE)) { /* can't have passive initiator data when using active mode */
switch (nbr) {
case NBR_106:
abtCmd[4] |= 0x01;
memcpy (abtCmd + offset, pbtPassiveInitiatorData, 4);
offset += 4;
break;
case NBR_212:
case NBR_424:
abtCmd[4] |= 0x01;
memcpy (abtCmd + offset, pbtPassiveInitiatorData, 5);
offset += 5;
break;
case NBR_847:
case NBR_UNDEFINED:
// XXX Maybe we should put a "syntax error" or sth like that
pnd->iLastError = DENOTSUP;
return false;
break;
}
}
if (pbtNFCID3i) {
abtCmd[4] |= 0x02;
memcpy (abtCmd + offset, pbtNFCID3i, 10);
offset += 10;
}
if (szGBi && pbtGBi) {
abtCmd[4] |= 0x04;
memcpy (abtCmd + offset, pbtGBi, szGBi);
offset += szGBi;
}
// Try to find a target, call the transceive callback function of the current device
if (!pn53x_transceive (pnd, abtCmd, offset, abtRx, &szRx))
return false;
// Make sure one target has been found, the PN53X returns 0x00 if none was available
if (abtRx[1] != 1)
return false;
// Is a target struct available
if (pnt) {
pnt->nm.nmt = NMT_DEP;
pnt->nm.nbr = nbr;
memcpy (pnt->nti.ndi.abtNFCID3, abtRx + 2, 10);
pnt->nti.ndi.btDID = abtRx[12];
pnt->nti.ndi.btBS = abtRx[13];
pnt->nti.ndi.btBR = abtRx[14];
pnt->nti.ndi.btTO = abtRx[15];
pnt->nti.ndi.btPP = abtRx[16];
if(szRx > 17) {
pnt->nti.ndi.szGB = szRx - 17;
memcpy (pnt->nti.ndi.abtGB, abtRx + 17, pnt->nti.ndi.szGB);
} else {
pnt->nti.ndi.szGB = 0;
}
}
return true;
}
bool
pn53x_initiator_transceive_bits (nfc_device_t * pnd, const byte_t * pbtTx, const size_t szTxBits,
const byte_t * pbtTxPar, byte_t * pbtRx, size_t * pszRxBits, byte_t * pbtRxPar)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
size_t szFrameBits = 0;
size_t szFrameBytes = 0;
uint8_t ui8rcc;
uint8_t ui8Bits = 0;
byte_t abtCmd[sizeof (pncmd_initiator_exchange_raw_data)];
memcpy (abtCmd, pncmd_initiator_exchange_raw_data, sizeof (pncmd_initiator_exchange_raw_data));
// Check if we should prepare the parity bits ourself
if (!pnd->bPar) {
// Convert data with parity to a frame
pn53x_wrap_frame (pbtTx, szTxBits, pbtTxPar, abtCmd + 2, &szFrameBits);
} else {
szFrameBits = szTxBits;
}
// Retrieve the leading bits
ui8Bits = szFrameBits % 8;
// Get the amount of frame bytes + optional (1 byte if there are leading bits)
szFrameBytes = (szFrameBits / 8) + ((ui8Bits == 0) ? 0 : 1);
// When the parity is handled before us, we just copy the data
if (pnd->bPar)
memcpy (abtCmd + 2, pbtTx, szFrameBytes);
// Set the amount of transmission bits in the PN53X chip register
if (!pn53x_set_tx_bits (pnd, ui8Bits))
return false;
// Send the frame to the PN53X chip and get the answer
// We have to give the amount of bytes + (the two command bytes 0xD4, 0x42)
if (!pn53x_transceive (pnd, abtCmd, szFrameBytes + 2, abtRx, &szRx))
return false;
// Get the last bit-count that is stored in the received byte
if (!pn53x_get_reg (pnd, REG_CIU_CONTROL, &ui8rcc))
return false;
ui8Bits = ui8rcc & SYMBOL_RX_LAST_BITS;
// Recover the real frame length in bits
szFrameBits = ((szRx - 1 - ((ui8Bits == 0) ? 0 : 1)) * 8) + ui8Bits;
// Ignore the status byte from the PN53X here, it was checked earlier in pn53x_transceive()
// Check if we should recover the parity bits ourself
if (!pnd->bPar) {
// Unwrap the response frame
pn53x_unwrap_frame (abtRx + 1, szFrameBits, pbtRx, pszRxBits, pbtRxPar);
} else {
// Save the received bits
*pszRxBits = szFrameBits;
// Copy the received bytes
memcpy (pbtRx, abtRx + 1, szRx - 1);
}
// Everything went successful
return true;
}
bool
pn53x_initiator_transceive_bytes (nfc_device_t * pnd, const byte_t * pbtTx, const size_t szTx, byte_t * pbtRx,
size_t * pszRx)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szExtraTxLen,
szRx;
byte_t abtCmd[sizeof (pncmd_initiator_exchange_raw_data)];
// We can not just send bytes without parity if while the PN53X expects we handled them
if (!pnd->bPar)
return false;
// Copy the data into the command frame
if (pnd->bEasyFraming) {
memcpy (abtCmd, pncmd_initiator_exchange_data, sizeof (pncmd_initiator_exchange_data));
abtCmd[2] = 1; /* target number */
memcpy (abtCmd + 3, pbtTx, szTx);
szExtraTxLen = 3;
} else {
memcpy (abtCmd, pncmd_initiator_exchange_raw_data, sizeof (pncmd_initiator_exchange_raw_data));
memcpy (abtCmd + 2, pbtTx, szTx);
szExtraTxLen = 2;
}
// To transfer command frames bytes we can not have any leading bits, reset this to zero
if (!pn53x_set_tx_bits (pnd, 0))
return false;
// Send the frame to the PN53X chip and get the answer
// We have to give the amount of bytes + (the two command bytes 0xD4, 0x42)
if (!pn53x_transceive (pnd, abtCmd, szTx + szExtraTxLen, abtRx, &szRx))
return false;
// Save the received byte count
*pszRx = szRx - 1;
// Copy the received bytes
memcpy (pbtRx, abtRx + 1, *pszRx);
// Everything went successful
return true;
}
#define SAK_ISO14443_4_COMPLIANT 0x20
bool
pn53x_target_init (nfc_device_t * pnd, nfc_target_t * pnt, byte_t * pbtRx, size_t * pszRx)
{
// Save the current configuration settings
bool bCrc = pnd->bCrc;
bool bPar = pnd->bPar;
pn53x_target_mode_t ptm = PTM_NORMAL;
switch (pnt->nm.nmt) {
case NMT_ISO14443A:
ptm = PTM_PASSIVE_ONLY;
pn53x_set_parameter(pnd, PARAM_AUTO_ATR_RES, false);
if (pnd->nc == NC_PN532) { // We have a PN532
if ((pnt->nti.nai.btSak & SAK_ISO14443_4_COMPLIANT) && (pnd->bAutoIso14443_4)) { // We have a ISO14443-4 tag to emulate and NDO_AUTO_14443_4A option is enabled
ptm |= PTM_ISO14443_4_PICC_ONLY; // We add ISO14443-4 restriction
pn53x_set_parameter(pnd, PARAM_14443_4_PICC, true);
} else {
pn53x_set_parameter(pnd, PARAM_14443_4_PICC, false);
}
}
break;
case NMT_FELICA:
ptm = PTM_PASSIVE_ONLY;
break;
case NMT_DEP:
pn53x_set_parameter(pnd, PARAM_AUTO_ATR_RES, true);
ptm = PTM_DEP_ONLY;
if (pnt->nti.ndi.ndm == NDM_PASSIVE) {
ptm |= PTM_PASSIVE_ONLY; // We add passive mode restriction
}
break;
case NMT_ISO14443B:
case NMT_JEWEL:
pnd->iLastError = DENOTSUP;
return false;
break;
}
// Make sure the CRC & parity are handled by the device, this is needed for target_init to work properly
if (!bCrc)
pn53x_configure ((nfc_device_t *) pnd, NDO_HANDLE_CRC, true);
if (!bPar)
pn53x_configure ((nfc_device_t *) pnd, NDO_HANDLE_PARITY, true);
// Let the PN53X be activated by the RF level detector from power down mode
if (!pn53x_set_reg (pnd, REG_CIU_TX_AUTO, SYMBOL_INITIAL_RF_ON, 0x04))
return false;
byte_t abtMifareParams[6];
byte_t * pbtMifareParams = NULL;
byte_t * pbtTkt = NULL;
size_t szTkt = 0;
byte_t abtFeliCaParams[18];
byte_t * pbtFeliCaParams = NULL;
const byte_t * pbtNFCID3t = NULL;
const byte_t * pbtGBt = NULL;
size_t szGBt = 0;
switch(pnt->nm.nmt) {
case NMT_ISO14443A: {
// Set ATQA (SENS_RES)
abtMifareParams[0] = pnt->nti.nai.abtAtqa[1];
abtMifareParams[1] = pnt->nti.nai.abtAtqa[0];
// Set UID
// Note: in this mode we can only emulate a single size (4 bytes) UID where the first is hard-wired by PN53x as 0x08
abtMifareParams[2] = pnt->nti.nai.abtUid[1];
abtMifareParams[3] = pnt->nti.nai.abtUid[2];
abtMifareParams[4] = pnt->nti.nai.abtUid[3];
// Set SAK (SEL_RES)
abtMifareParams[5] = pnt->nti.nai.btSak;
pbtMifareParams = abtMifareParams;
// Historical Bytes
pbtTkt = iso14443a_locate_historical_bytes (pnt->nti.nai.abtAts, pnt->nti.nai.szAtsLen, &szTkt);
}
break;
case NMT_FELICA:
// Set NFCID2t
memcpy(abtFeliCaParams, pnt->nti.nfi.abtId, 8);
// Set PAD
memcpy(abtFeliCaParams+8, pnt->nti.nfi.abtPad, 8);
// Set SystemCode
memcpy(abtFeliCaParams+16, pnt->nti.nfi.abtSysCode, 2);
pbtFeliCaParams = abtFeliCaParams;
break;
case NMT_DEP:
// Set NFCID3
pbtNFCID3t = pnt->nti.ndi.abtNFCID3;
// Set General Bytes, if relevant
szGBt = pnt->nti.ndi.szGB;
if (szGBt) pbtGBt = pnt->nti.ndi.abtGB;
break;
case NMT_ISO14443B:
case NMT_JEWEL:
pnd->iLastError = DENOTSUP;
return false;
break;
}
bool targetActivated = false;
while (!targetActivated) {
nfc_modulation_t nm;
nfc_dep_mode_t ndm = NDM_UNDEFINED;
byte_t btActivatedMode;
if(!pn53x_TgInitAsTarget(pnd, ptm, pbtMifareParams, pbtTkt, szTkt, pbtFeliCaParams, pbtNFCID3t, pbtGBt, szGBt, pbtRx, pszRx, &btActivatedMode)) {
return false;
}
// Decode activated "mode"
switch(btActivatedMode & 0x70) { // Baud rate
case 0x00: // 106kbps
nm.nbr = NBR_106;
break;
case 0x10: // 212kbps
nm.nbr = NBR_212;
break;
case 0x20: // 424kbps
nm.nbr = NBR_424;
break;
};
if (btActivatedMode & 0x04) { // D.E.P.
nm.nmt = NMT_DEP;
if ((btActivatedMode & 0x03) == 0x01) { // Active mode
ndm = NDM_ACTIVE;
} else { // Passive mode
ndm = NDM_PASSIVE;
}
} else { // Not D.E.P.
if ((btActivatedMode & 0x03) == 0x00) { // MIFARE
nm.nmt = NMT_ISO14443A;
} else if ((btActivatedMode & 0x03) == 0x02) { // FeliCa
nm.nmt = NMT_FELICA;
}
}
if(pnt->nm.nmt == nm.nmt) { // Actual activation have the right modulation type
if ((pnt->nm.nbr == NBR_UNDEFINED) || (pnt->nm.nbr == nm.nbr)) { // Have the right baud rate (or undefined)
if ((pnt->nm.nmt != NMT_DEP) || (pnt->nti.ndi.ndm == NDM_UNDEFINED) || (pnt->nti.ndi.ndm == ndm)) { // Have the right DEP mode (or is not a DEP)
targetActivated = true;
}
}
}
if (targetActivated) {
pnt->nm.nbr = nm.nbr; // Update baud rate
if (pnt->nm.nmt == NMT_DEP) {
pnt->nti.ndi.ndm = ndm; // Update DEP mode
}
}
}
// Restore the CRC & parity setting to the original value (if needed)
if (!bCrc)
pn53x_configure ((nfc_device_t *) pnd, NDO_HANDLE_CRC, false);
if (!bPar)
pn53x_configure ((nfc_device_t *) pnd, NDO_HANDLE_PARITY, false);
return true;
}
bool
pn53x_TgInitAsTarget (nfc_device_t * pnd, pn53x_target_mode_t ptm,
const byte_t * pbtMifareParams,
const byte_t * pbtTkt, size_t szTkt,
const byte_t * pbtFeliCaParams,
const byte_t * pbtNFCID3t, const byte_t * pbtGBt, const size_t szGBt,
byte_t * pbtRx, size_t * pszRx, byte_t * pbtModeByte)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
byte_t abtCmd[39 + 47 + 48]; // Worst case: 39-byte base, 47 bytes max. for General Bytes, 48 bytes max. for Historical Bytes
size_t szOptionalBytes = 0;
memcpy (abtCmd, pncmd_target_init, sizeof (pncmd_target_init));
// Clear the target init struct, reset to all zeros
memset (abtCmd + sizeof (pncmd_target_init), 0x00, sizeof (abtCmd) - sizeof (pncmd_target_init));
// Store the target mode in the initialization params
abtCmd[2] = ptm;
// MIFARE part
if (pbtMifareParams) {
memcpy (abtCmd+3, pbtMifareParams, 6);
}
// FeliCa part
if (pbtFeliCaParams) {
memcpy (abtCmd+9, pbtFeliCaParams, 18);
}
// DEP part
if (pbtNFCID3t) {
memcpy(abtCmd+27, pbtNFCID3t, 10);
}
// General Bytes (ISO/IEC 18092)
if (pnd->nc == NC_PN531) {
if (szGBt) {
memcpy (abtCmd+37, pbtGBt, szGBt);
szOptionalBytes = szGBt;
}
} else {
abtCmd[37] = (byte_t)(szGBt);
if (szGBt) {
memcpy (abtCmd+38, pbtGBt, szGBt);
}
szOptionalBytes = szGBt + 1;
}
// Historical bytes (ISO/IEC 14443-4)
if (pnd->nc != NC_PN531) { // PN531 does not handle Historical Bytes
abtCmd[37+szOptionalBytes] = (byte_t)(szTkt);
if (szTkt) {
memcpy (abtCmd+38+szOptionalBytes, pbtTkt, szTkt);
}
szOptionalBytes += szTkt + 1;
}
// Request the initialization as a target
szRx = MAX_FRAME_LEN;
if (!pn53x_transceive (pnd, abtCmd, 37 + szOptionalBytes, abtRx, &szRx))
return false;
// Note: the first byte is skip:
// its the "mode" byte which contains baudrate, DEP and Framing type (Mifare, active or FeliCa) datas.
if(pbtModeByte) {
*pbtModeByte = abtRx[0];
}
// Save the received byte count
*pszRx = szRx - 1;
// Copy the received bytes
memcpy (pbtRx, abtRx + 1, *pszRx);
return true;
}
bool
pn53x_target_receive_bits (nfc_device_t * pnd, byte_t * pbtRx, size_t * pszRxBits, byte_t * pbtRxPar)
{
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
size_t szFrameBits;
uint8_t ui8rcc;
uint8_t ui8Bits;
// Try to gather a received frame from the reader
if (!pn53x_transceive (pnd, pncmd_target_receive, 2, abtRx, &szRx))
return false;
// Get the last bit-count that is stored in the received byte
if (!pn53x_get_reg (pnd, REG_CIU_CONTROL, &ui8rcc))
return false;
ui8Bits = ui8rcc & SYMBOL_RX_LAST_BITS;
// Recover the real frame length in bits
szFrameBits = ((szRx - 1 - ((ui8Bits == 0) ? 0 : 1)) * 8) + ui8Bits;
// Ignore the status byte from the PN53X here, it was checked earlier in pn53x_transceive()
// Check if we should recover the parity bits ourself
if (!pnd->bPar) {
// Unwrap the response frame
pn53x_unwrap_frame (abtRx + 1, szFrameBits, pbtRx, pszRxBits, pbtRxPar);
} else {
// Save the received bits
*pszRxBits = szFrameBits;
// Copy the received bytes
memcpy (pbtRx, abtRx + 1, szRx - 1);
}
// Everyting seems ok, return true
return true;
}
bool
pn53x_target_receive_bytes (nfc_device_t * pnd, byte_t * pbtRx, size_t * pszRx)
{
byte_t const *pbtTx;
byte_t abtRx[MAX_FRAME_LEN];
size_t szRx;
if (pnd->bEasyFraming) {
pbtTx = pncmd_target_get_data;
} else {
pbtTx = pncmd_target_receive;
}
// Try to gather a received frame from the reader
if (!pn53x_transceive (pnd, pbtTx, 2, abtRx, &szRx))
return false;
// Save the received byte count
*pszRx = szRx - 1;
// Copy the received bytes
memcpy (pbtRx, abtRx + 1, *pszRx);
// Everyting seems ok, return true
return true;
}
bool
pn53x_target_send_bits (nfc_device_t * pnd, const byte_t * pbtTx, const size_t szTxBits, const byte_t * pbtTxPar)
{
size_t szFrameBits = 0;
size_t szFrameBytes = 0;
uint8_t ui8Bits = 0;
byte_t abtCmd[sizeof (pncmd_target_send)];
memcpy (abtCmd, pncmd_target_send, sizeof (pncmd_target_send));
// Check if we should prepare the parity bits ourself
if (!pnd->bPar) {
// Convert data with parity to a frame
pn53x_wrap_frame (pbtTx, szTxBits, pbtTxPar, abtCmd + 2, &szFrameBits);
} else {
szFrameBits = szTxBits;
}
// Retrieve the leading bits
ui8Bits = szFrameBits % 8;
// Get the amount of frame bytes + optional (1 byte if there are leading bits)
szFrameBytes = (szFrameBits / 8) + ((ui8Bits == 0) ? 0 : 1);
// When the parity is handled before us, we just copy the data
if (pnd->bPar)
memcpy (abtCmd + 2, pbtTx, szFrameBytes);
// Set the amount of transmission bits in the PN53X chip register
if (!pn53x_set_tx_bits (pnd, ui8Bits))
return false;
// Try to send the bits to the reader
if (!pn53x_transceive (pnd, abtCmd, szFrameBytes + 2, NULL, NULL))
return false;
// Everyting seems ok, return true
return true;
}
bool
pn53x_target_send_bytes (nfc_device_t * pnd, const byte_t * pbtTx, const size_t szTx)
{
byte_t abtCmd[MAX (sizeof (pncmd_target_send), sizeof (pncmd_target_set_data))];
// We can not just send bytes without parity if while the PN53X expects we handled them
if (!pnd->bPar)
return false;
if (pnd->bEasyFraming) {
memcpy (abtCmd, pncmd_target_set_data, sizeof (pncmd_target_set_data));
} else {
memcpy (abtCmd, pncmd_target_send, sizeof (pncmd_target_send));
}
// Copy the data into the command frame
memcpy (abtCmd + 2, pbtTx, szTx);
// Try to send the bits to the reader
if (!pn53x_transceive (pnd, abtCmd, szTx + 2, NULL, NULL))
return false;
// Everyting seems ok, return true
return true;
}
const pn53x_modulation_t
pn53x_nm_to_pm(const nfc_modulation_t nm)
{
switch(nm.nmt) {
case NMT_ISO14443A:
return PM_ISO14443A_106;
break;
case NMT_ISO14443B:
switch(nm.nbr) {
case NBR_106:
return PM_ISO14443B_106;
break;
case NBR_212:
return PM_ISO14443B_212;
break;
case NBR_424:
return PM_ISO14443B_424;
break;
case NBR_847:
return PM_ISO14443B_847;
break;
case NBR_UNDEFINED:
// Nothing to do...
break;
}
break;
case NMT_JEWEL:
return PM_JEWEL_106;
break;
case NMT_FELICA:
switch(nm.nbr) {
case NBR_212:
return PM_FELICA_212;
break;
case NBR_424:
return PM_FELICA_424;
break;
case NBR_106:
case NBR_847:
case NBR_UNDEFINED:
// Nothing to do...
break;
}
break;
case NMT_DEP:
// Nothing to do...
break;
}
return PM_UNDEFINED;
}
const nfc_modulation_t
pn53x_ptt_to_nm( const pn53x_target_type_t ptt )
{
switch (ptt) {
case PTT_GENERIC_PASSIVE_106:
case PTT_GENERIC_PASSIVE_212:
case PTT_GENERIC_PASSIVE_424:
case PTT_UNDEFINED:
// XXX This should not happend, how handle it cleanly ?
break;
case PTT_MIFARE:
case PTT_ISO14443_4A_106:
return (const nfc_modulation_t){ .nmt = NMT_ISO14443A, .nbr = NBR_106 };
break;
case PTT_ISO14443_4B_106:
case PTT_ISO14443_4B_TCL_106:
return (const nfc_modulation_t){ .nmt = NMT_ISO14443B, .nbr = NBR_106 };
break;
case PTT_JEWEL_106:
return (const nfc_modulation_t){ .nmt = NMT_JEWEL, .nbr = NBR_106 };
break;
case PTT_FELICA_212:
return (const nfc_modulation_t){ .nmt = NMT_FELICA, .nbr = NBR_212 };
break;
case PTT_FELICA_424:
return (const nfc_modulation_t){ .nmt = NMT_FELICA, .nbr = NBR_424 };
break;
case PTT_DEP_PASSIVE_106:
case PTT_DEP_ACTIVE_106:
return (const nfc_modulation_t){ .nmt = NMT_DEP, .nbr = NBR_106 };
break;
case PTT_DEP_PASSIVE_212:
case PTT_DEP_ACTIVE_212:
return (const nfc_modulation_t){ .nmt = NMT_DEP, .nbr = NBR_212 };
break;
case PTT_DEP_PASSIVE_424:
case PTT_DEP_ACTIVE_424:
return (const nfc_modulation_t){ .nmt = NMT_DEP, .nbr = NBR_424 };
break;
}
}
const pn53x_target_type_t
pn53x_nm_to_ptt(const nfc_modulation_t nm)
{
switch(nm.nmt) {
case NMT_ISO14443A:
return PTT_MIFARE;
// return PTT_ISO14443_4A_106;
break;
case NMT_ISO14443B:
switch(nm.nbr) {
case NBR_106:
return PTT_ISO14443_4B_106;
break;
case NBR_UNDEFINED:
case NBR_212:
case NBR_424:
case NBR_847:
// Nothing to do...
break;
}
break;
case NMT_JEWEL:
return PTT_JEWEL_106;
break;
case NMT_FELICA:
switch(nm.nbr) {
case NBR_212:
return PTT_FELICA_212;
break;
case NBR_424:
return PTT_FELICA_424;
break;
case NBR_UNDEFINED:
case NBR_106:
case NBR_847:
// Nothing to do...
break;
}
break;
case NMT_DEP:
// Nothing to do...
break;
}
return PTT_UNDEFINED;
}