jarjar/libnfc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Updates contrib examples to use new format.

Browse Source 
- See Issue #335.
- At some point, the conf file format appears to be updated to need
  device.X, but these contrib samples were never updated.
This commit is contained in:
Josh Datko 2016-06-15 22:53:51 -06:00
parent 403650a0fc
commit 2f2c3c8fec
5 changed files with 10 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
contrib/libnfc/arygon.conf.sample
View File

@ -1,3 +1,3 @@
## Typical configuration file for Arygon/IDentive device (with Arygon-MCU on board)
name = "IDentive"
connstring = arygon:/dev/ttyS0
device.name = "IDentive"
device.connstring = arygon:/dev/ttyS0

4
contrib/libnfc/pn532_i2c_on_rpi.conf.sample
View File

@ -2,8 +2,8 @@
## Note: to use SPI port on R-Pi, you have to load kernel modules i2c-bcm2708 and i2c-dev:
## Edit /etc/modprobe.d/raspi-blacklist.conf and comment: #blacklist i2c-bcm2708
## Edit /etc/modules and add a new line: i2c-dev
name = "PN532 board via I2C"
connstring = pn532_i2c:/dev/i2c-0
device.name = "PN532 board via I2C"
device.connstring = pn532_i2c:/dev/i2c-0
# Note: If you have an R-Pi revision 2.0, the I2C bus #1 is now routed to connector P1
# (instead of the I2C bus #0 routed on same connector on initial board revision), so

4
contrib/libnfc/pn532_spi_on_rpi.conf.sample
View File

@ -1,5 +1,5 @@
## Typical configuration file for PN532 device on R-Pi connected using SPI
## Note: to use SPI port on R-Pi, you have to load kernel module spi-bcm2708:
## Edit /etc/modprobe.d/raspi-blacklist.conf and comment: #blacklist spi-bcm2708
name = "PN532 board via SPI"
connstring = pn532_spi:/dev/spidev0.0:500000
device.name = "PN532 board via SPI"
device.connstring = pn532_spi:/dev/spidev0.0:500000

4
contrib/libnfc/pn532_uart_on_rpi.conf.sample
View File

@ -1,5 +1,5 @@
## Typical configuration file for PN532 device on R-Pi connected using UART
## Note: to use UART port on R-Pi, you have to disable linux serial console:
## http://learn.adafruit.com/adafruit-nfc-rfid-on-raspberry-pi/freeing-uart-on-the-pi
name = "PN532 board via UART"
connstring = pn532_uart:/dev/ttyAMA0
device.name = "PN532 board via UART"
device.connstring = pn532_uart:/dev/ttyAMA0

4
contrib/libnfc/pn532_via_uart2usb.conf.sample
View File

@ -1,3 +1,3 @@
## Typical configuration file for PN532 board (ie. microbuilder.eu / Adafruit) device
name = "Adafruit PN532 board via UART"
connstring = pn532_uart:/dev/ttyUSB0
device.name = "Adafruit PN532 board via UART"
device.connstring = pn532_uart:/dev/ttyUSB0